Netherlands NL   
I connected a flow sensor to SMARTDAC+ GX/GP series, but can you tell me how to configure flow measurement?

I connected a flow sensor to SMARTDAC+ GX/GP series, but can you tell me how to configure flow measurement?

You can use the Scaling function to measure flow. The following is an example using main unit slot 1, channel 1 (0101), with an input signal of 1–5 VDC at 0.0–100.0 m3/h.
Go to MENU key > Browse tab > Setting >Setting menu > AI channel settings > Range. Under Computation, tap Linear scaling, and then set the physical quantities. For details, see “Advanced Operation (Various settings and operation)” in the first step guide (IM 04L51B01-02EN).

Gerelateerde producten & oplossingen

  • Touch Screen GP10/GP20

    De SMARTDAC+TM GP10/GP20 is een draagbare papierloze recorder met een modulaire architectuur op het achterpaneel en heeft een dataloggingfunctie om de benodigde gegevens te verkrijgen. Door niet alleen I/O te ondersteunen, maar ook veel communicatieprotocollen, kunt u verbinding maken met verschillende apparaten. AI functioneert standaard. Ondersteuning van FDA 21 CFR Part11 en AMS2750E/NADCAP.

  • Touch Screen Paperless Recorder GX10/GX20

    The SMARTDAC+TM GX10/GX20 is a panel mount paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices. GX utilizes AI. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

Top