UD310
Mededeling: Dit product is niet meer leverbaar vanaf Dec 29, 2017. Zie dit vervangende product:

1/16 DIN sized Manual Setter has large PV display, and transmit 4 to 20 mA DC signal by manual operation. It can be used as a remote setter of target setpoint for digital Indicating controllers. Two alarm outputs and PV retransmission output are standard features.

The UD310 Manual Setter (1/16 DIN size) has a PV display, and transmit 4 to 20 mA DC signal by manual operation. It can be used as a remote setter for digital Indicating controllers. The SP (target setpoint) will be output 3 seconds after the change. The two alarm outputs and a PV retransmission output are provided as standard functions.

  • Small, space-saving 1/16 DIN package, 48 (W) x 48 (H) x 100 (D) (mm)
  • Large 4-digit LED display.
  • IP65 splash-proof and dust-proof designed front panel.
  • Universal input for Thermocouple, RTD and DC mV/V signals.
  • PV display disappeared function, when PV display is not necessary.
  • Standard retransmission output of measured value (PV).
  • Standard two alarm outputs.
  • Standard universal power supply (100 V to 240 V AC) and optional 24 V AC/DC power supply.
  • RoHS Compliant

Details

Middelen

Set them in the order, Alarm type → Alarm setting values. They will also not be displayed if you select an alarm for which no value is set.
What are energize/de-energize alarms?
(ns-faq-green-9076-term)
For energize alarms, ON contact results when an alarm occurs. For de-energize alarms, OFF contact results when an alarm occurs. Note that OFF contact also results when the power fails.
The sensor wire on the input side might be broken or disconnected.
Check whether the wiring to the power supply terminal is correct. If only the LCD on the UT/UP700 does not display, a custom computation may be set for no display. If the PV display is also blank, this may indicate product failure. Please contact you...
PCBs (polychlorinated biphenyl) were banned from manufacturing and imports in 1975. The GREEN series began to be manufactured in 1997, and do not include PCBs.
No. When an alarm occurs, it automatically recovers if values enter the normal range.
There are 2 types of output available, FAIL and "failure diagnosis."
600 Ω.
How do I change the input type?
(ns-faq-green-9014-spec)
If you change the input type, parameters will be initialized. We do not recommend that you make changes while in operation.
Do Green series controllers support Ethernet?
(ns-faq-green-9009-connect)
Yes. This requires an RS-485/Ethernet converter such as VJET. The controller must also have a communication option. Some models can be connected directly with the UTAdvanced series.
The PV value can be written by using the ladder sequence function of UTAdvanced series. However, when communication is interrupted, the PV value is retained.
Yes, but if you change some parameters, others will be initialized. We do not recommend that you make changes while in operation.
These cannot be set when in Custom Computation mode.
There is no current input range.
(ns-faq-green-9018-spec)
Use a resistor to input current as voltage. A resistor is available: X010-250-2 (250 Ω).
The are set with a real number. For temperature, it is set in degrees Celsius.

Downloads

Op zoek naar meer informatie over onze mensen, technologie en oplossingen?

Contact

Top