Replacement of Legacy System with CENTUM CS 3000 Ensures Steady Supply of Electricity to Thai National Grid

Samutprakarn Cogeneration logo
Download (895 KB)

Executive Summary

Samutprakarn Cogeneration, Samutprakarn, Thailand
Samutprakarn Cogeneration,
Samutprakarn, Thailand

A 126 MW gas fired cogeneration power plant built by Thailand's Samutprakarn Cogeneration Co., Ltd. began generating electricity on August 23, 1999. Ninety MW of its output is supplied to the Thai National Grid, with the remainder going to local companies. The plant operates 24 hours a day, seven days a week, and is shut down for 35 days once a year for maintenance. A major overhaul is done every six years. For improved efficiency, this power plant was designed to have more than one thermodynamic cycle, and uses both gas and steam turbines. Two GE gas turbines burn fuel to produce heat energy and generate electricity, and the waste heat is used to produce steam that passes through an Alstom steam turbine to generate additional electricity.

The gas fuel for this plant comes from a PTT gas separation plant, which receives gas via an undersea pipeline from wells in the Gulf of Thailand. The plant's boilers utilize heat recovery steam generators (HRSG) with a capacity of 80 t/h (max.120 t/h) and a maximum allowable steam pressure of 65 bar. The steam temperature is 500 degrees Celsius.

The decision by Samutprakarn Cogeneration to upgrade this plant's legacy distributed control system was made because it was proving difficult to procure spare parts from the system vendor. Yokogawa Thailand successfully installed the CENTUM CS 3000 system on schedule and on budget.

Central control room

Central control room

The Challenges and the Solutions

1. Steady power supply
With 90% of this plant's generated power going to the Thai National Grid, which is owned and operated by the Electricity Generating Authority of Thailand (EGAT), it is vital for the production control system to be highly reliable. EGAT sends a power demand pattern every month (see figure) to the power station and it must generate electricity accordingly. With an availability that exceeds 99.99999%, Yokogawa's CENTUM CS 3000 system has been key to meeting this requirement.

request from EGAT

2. Operational data visualization for safe operation
The Yokogawa CENTUM CS 3000 controls and monitors the plant's HRSG units and its balance of plant (BOP) facilities. Other vendors'systems such as the gas turbine and steam turbine control systems are all integrated through Modbus interfaces with the CENTUM CS 3000 system, so almost all plant data can be viewed at the CENTUM CS 3000 human machine interface (HMI) stations. Operators can clearly see in real time the status of the compressors and all other equipment throughout the plant, and thus have the information they need to take quick and effective action when necessary. This data is also used to facilitate equipment diagnosis so that engineers can schedule maintenance at the most appropriate time and ensure safe operation.

Power generation overview

Power generation overview

3. Sustainable power generation
The replacement of this plant's legacy control system has enhanced performance in a number of ways. This includes steady improvement in the heat rate (BTU/KWH), as shown in the graph:

Heat rate (BTU/KWH) graph

Heat rate (BTU/KWH) graph

Signals from a variety of analyzers are also monitored by the CENTUM system to control emissions. The continuous measurement of CO and O2 concentrations allows operators at this power plant to fine tune the air-fuel ratio and thereby boost combustion efficiency and reduce NOx emissions.

Signals from a variety of analyzers

Signals from a variety of analyzers

Signals from a variety of analyzers

Signals from a variety of analyzers

Customer Satisfaction

Kitpoat Srasomsub, Maintenance Manager, had the following to say about the plant's new control system: "We have been very happy with Yokogawa's CENTUM CS 3000 since introducing it in 2007. The system is very reliable and there have been no major problems with it. We have the important mission of providing a steady supply of electricity to both the EGAT national grid and local companies 24 hours a day, seven days a week, throughout the year. We are always striving to improve efficiency and reduce emissions through the visualization of all plant data."

Signals from a variety of analyzers
Mr. Srasomsub


  • Cogeneration

    Cogeneration or combined heat and power (CHP) is an efficient approach to generating power and thermal energy from a single fuel source.

    See More
  • Power

    In the mid 1970s, Yokogawa entered the power business with the release of the EBS Electric Control System. Since then, Yokogawa has steadfastly continued with the development of our technologies and capabilities for providing the best services and solutions to our customers worldwide.

    Yokogawa has operated the global power solutions network to play a more active role in the dynamic global power market. This has allowed closer teamwork within Yokogawa, bringing together our global resources and industry know-how. Yokogawa's power industry experts work together to bring each customer the solution that best suits their sophisticated requirements.

    See More

Related Products & Solutions

  • Distributed Control System (DCS)

    Our distributed control system (DCS) enables automation and control of industrial processes and enhanced business performance. Over 10,000 plants entrust Yokogawa DCS to deliver their production goals.

    See More

Have Questions?

Contact a Yokogawa Expert to learn how we can help you solve your challenges.