I am using a DAQLOGGER + GateMX/MW combination and connecting to an MW100. After adding channels on the MW100, how do I do acquisition of those added channels on DAQLOGGER?

Stop monitoring and recording on DAQLOGGER, then perform steps 1 to 3.

1. On GateMX/MW, click the Acquire button of the corresponding MW100 to get the MW100's information.
2. In DAQLOGGER manager, use "ENVI" on the Gate to perform automatic model determination.
3. Under "TAG assignments," assign the added channels to empty tags.

Note) Do not set automatic TAG assignments. This might cause the added channels to be out of synch with other tag assignments.