Débitmètres électromagnétiques ADMAG TI – AXW

Spécifications et fonctions 

Veuillez vous référer aux spécifications générales pour plus de détails. 
 

	Type déporté		Type Intégré
	AXG1A Transmetteur haute performance	AXW4A Transmetteur	AXW Type intégré
Précision (valeur lue)	[Combiné avec capteur] - AXW: ± 0.35 %	[Combiné avec capteur] - AXW: ± 0.35 %	± 0.35 %
Taille	[Combiné avec capteur] - AXW: 25 to 1800 mm	[Combiné avec capteur] - AXW: 25 to 1000 mm	25 to 1000 mm
Use	[Transmetteur] - Proposition générale [Combiné avec capteur] - Proposition générale - Protégé contre l’explosion - Submersible	[Tansmitter] - Proposition générale - Protégé contre l’explosion [Combiné avec capteur] - Proposition générale - Protégé contre l’explosion - Submersible	Proposition générale Protégé contre l’explosion
Type de protection contre l’explosion	IECEx, ATEX, Korea, Brazil (INMETRO) * Transmetteur utilisable uniquement en zone sûre	IECEx, ATEX, Korea, Brazil (INMETRO)
Type de revêtement tube	PTFE, Polyuréthane, Caoutchouc souple naturel, Caoutchouc dur naturel
Protocoles de communication	HART 7, BRAIN	HART 7, BRAIN, Modbus FOUNDATION Fieldbus
Longueur câble signal	200 m	100 m	－
Principales fonctions	- Configuration simplifiée - Affichage courbe à l’écran - Enregistrement de données (avec carte microSD) - Sauvegarder/restaurer/dupliquer les paramètres - Ajustement Zéro - Test à l’affichage - Test des entrèes/sorties
Fonctions diagnostique	[Diagnostiques application] - Détection colmatage électrodes - Tube vide - Diagnostique câblage - Diagnostique bruit process - Diagnostique basse conductivité - Test isolement électrodes - Diagnostique détérioration	[Diagnostiques application] - Détection colmatage électrodes - Tube vide - Diagnostique câblage
	[Fonction vérification] - Vérification intégrée - Vérification Standard (Avec FSA130 ADMAG TI VérificationTool) - Vérification Augmentée (Avec FSA130 ADMAG TI VérificationTool)
Signaux courant	Entrée : 1 voie (Active) Sortie : 2 voies (Actives)	Sortie : 1 voie (Active)
Signaux Pulse/Status	Sortie : 2 voies (Active [avec/sans résistance interne]/Passive)	Sortie : 2 voies (Active [sans résistance interne]/Passive)
Signaux Status	Entrées : 2 voies ( Contacts secs) Sorties : 2 voies (Passives)	Entrée : 1 voie (Contact sec)
Signaux Alarmes	Sortie: 1 voie (Passives)	－
Plusieurs Langues	Anglais, Français, Allemand, Italien, Espagnole, Portugais, Russe et Japonais
Certification SIL	－	SIL1
Autres	[AXG1A/AXW4A Transmetteur, AXW type intégré]  - LCD résistant aux conditions environnementales [AXG1A Transmetteur]  - Equipé avec bornier d’entrée température pour correction de densité et calcul d’énergie

Disponible pour être combiné avec le transmetteur de haute performance AXG1A 

Le transmetteur de haute performance AXG1A est prévu pour succéder à l'AXFA11.
Tout comme AXFA11, le transmetteur AXG1A peut être combiné avec le capteur de débit AXW.
La position des bornes d'entrée/sortie et la position des trous de montage du poteau sont identiques, ce qui facilite le remplacement de l'AXFA11 par l'AXG1A .
 

Principal domaine d’application 

C'est un produit idéal pour les process industriels communs et les applications dans le domaine de l'eau et des eaux usées.
Un matériau de revêtement présentant une excellente résistance à l'usure et à la corrosion est disponible pour fournir une mesure de débit très précise et stable.
 

Total Insight - Simplified Selection -

Product Finder

Have you ever struggled to select the most suitable product / specification for the process being measured?

The product selection support tool "Product Finder" that operates on our website supports you.
It is available to select more easily the most suitable products and specifications for the purpose and measurement conditions.

Try Product Finder right now

Total Insight - Smart Assist -

Multiple Language

ADMAG AXW supports not only English but also nine languages in total:
French, German, Italian, Spanish, Portuguese, Russian, Chinese, and Japanese.
This helps to prevent stress, misunderstandings, and parameter setting errors that occur when using languages that you are not familiar with.

Wizard Function

Have you ever been struggling to set up the necessary parameters at startup time?

With ADMAG AXG, it is available to set interactively the minimum required parameters for operation start in an interactive manner.

Cable Connection Checking Function

When installing multiple transmitters and detectors at one time, have you ever made a mistake in connecting cables?

ADMAG AXW diagnoses whether the transmitter and detector are connected in the correct combination.
This helps reduce start-up wasted time caused by incorrect cable connections.

Total Insight - Process Guard -

Detection of Electrode Adhesion (Insulator)

If you remove the detector and check the inside, there are no deposits, and as a result there is no experience in wasting the removal work?

With ADMAG AXW, it is available to monitor the adhesion of the electrode while continuing the flow measurement without removing the detector.
This contributes to the development of a maintenance plan.

Process Data Trend Display

Have you ever wanted to simply grasp the process values in a trend graph without using external equipment?

ADMAG AXW can display process values as trend graphs, as well as numerical information, and can “visualize” process value changes from the past to the present. This function displays one process value per screen, and it can switch up to four process values by switching the screen.
There are 11 types of process values that can be displayed, and 6 types of screen update cycles.
The vertical axis is scaled automatically and always displays a graph that is easy to see.

Data Logging Function

Have you ever wanted to simply record process information without using an external device?

ADMAG AXW can be equipped with a microSD card (optional) and can store process information. This makes it possible to record process information simply if there is a device itself. Also, data is stored in text format. Therefore, analysis using spreadsheet software is also possible by importing data into a PC via a microSD card.

This function can record up to four process information simultaneously. Ten types of recordable process information are available. It is available to set the sampling cycle from 7 types and the continuous recording time from 8 types.

Total Insight - Expert Solution -

Verification (Device Health Diagnosis) Function

How long does it take each device to carry out an equipment inspection?

It varies according to application and process, inspection item and worker skill.
ADMAG AXW offers the following three methods to easily diagnose the soundness of equipment.
It is available to choose the best diagnosis method according to the situation and the diagnosis you want to check.
Anyone can check the same item automatically.

Built-in Verification Function (Our proprietary patented technology)

Built-in verification diagnoses the integrity of the transmitter and detector.
As the soundness of the converter, it diagnoses three items: “Calculation circuit”, “Device status (error history)” and “Connection status”.
We diagnose two of "magnetic circuit" and "excitation circuit" as soundness of the detector.
Then, based on the results of these five soundness diagnoses, the soundness of the entire device is diagnosed.

Standard Verification

In addition to the diagnostic content of the built-in verification function, the standard verification function can inspect the appearance of the chassis and display board, and diagnose the dot missing of the LCD.
In addition, since the diagnosis results can be output as A4 size PDF, they can be used as supplementary data for reporting and management of inspection history. To use the standard verification function, separately purchase the "FSA130 ADMAG TI Verification Tool".

Enhanced Verification

The extended verification function can diagnose the soundness of current input / output, pulse output, transducer accuracy, and electrode insulation resistance by using external devices in addition to the standard verification diagnostic contents.
In addition, manual input of the diagnosis results not only increase the number of diagnosis items but also improve the diagnosis accuracy of the soundness. This also can output the diagnosis result as A4 size PDF.
To use the extended verification function, separately purchase the "FSA130 ADMAG TI Verification Tool".

Available microSD Card

Have you ever taken the time to backup device parameters, copy parameters to replacement devices, etc.?
Also, have you ever wanted to simply record process information without using an external device?

With ADMAG AXW, you can install microSD card to the converter by selecting option.
Using the microSD card enables easy recording of process information in addition to backup / restore / duplication of parameters, which is useful for improving maintenance work efficiency and analyzing process status.

Parameter Backup / Restore / Duplication Function

ADMAG AXW can be equipped with a microSD card (optional) and can backup / restore / duplicate parameter information using the microSD card or a memory with a built-in LCD.

With these functions, for example, if there is a defect in the parameter settings, you can restore the previous settings.
In addition, since the factory settings are maintained, it is possible to reset to the factory settings.
Furthermore, it is possible to duplicate multiple devices with the same parameters, which contributes to the realization of rapid device replacement.

Data Logging Function

Have you ever wanted to simply record process information without using an external device?

ADMAG AXW can be equipped with a microSD card (optional) and can store process information. This makes it possible to record process information simply if there is a device itself. Also, data is stored in text format. Therefore, analysis using spreadsheet software is also possible by importing data into a PC via a microSD card.
This function can record up to four process information simultaneously. Ten types of recordable process information are available. It is available to set the sampling cycle from 7 types and the continuous recording time from 8 types.

Dual Frequency Excitation Method

By combining the signals obtained by low frequency excitation and high frequency excitation, it is our unique revolutionary excitation method that has succeeded in covering each defect and extracting only the superiority.
It combines the advantages of low frequency excitation zero points stability, high frequency excitation noise resistance and high speed response.

Both noise resistance and zero points stability

The fluid noise that appears when measuring slurry fluid or low conductivity fluid has "1/f characteristics".
In other words, low frequency components tend to be noisy, while high frequency components tend to be less noisy.
Therefore, high frequency excitation is effective to ensure noise resistance.
However, in conventional high frequency excitation, there was a problem that "zero points become unstable".

In "Dual Frequency Excitation Method", sampling is performed in the area not affected by noise on the high frequency side, and stable zero points components are extracted with a large time constant on the low frequency side.
Therefore, the synthesized signal has a very small effect of noise and stable zero points.

"0.1 seconds" fast response

In order to realize the stability of the zero points while reducing the influence of noise, the time constant is generally increased.
But that would hurt responsiveness.
The solution is "Dual Frequency Excitation Method" how to simultaneously meet the effects of noise reduction, zero points stability and response.
In “Dual Frequency Excitation Method”, high-speed response of “0.1 seconds” is possible because the change in flow rate is detected on the high frequency side.

Display and output of Flow Noise Intensity

Conventional models have removed fluid noise signals using our proprietary signal processing technology "Dual Frequency Excitation Method". On the other hand, understanding the fluid noise signal is also useful for identifying the cause of occurrence and preventing it.

With ADMAG AXG, the intensity of fluid noise can be displayed and output separately from flow signal output.
As a result, while realizing stable flow rate measurement, it has become possible to grasp at what intensity fluid noise is generated.
This makes it possible to monitor conditions such as air bubble / slurry contamination, lining wear, and liquid replacement (chemical injection, cleaning) that are the causes of fluid noise.

Electrode Adhesion Detection

Preventing electrode adhesion in advance is one point of stable flow rate measurement.
With ADMAG AXW, the degree of adhesion can be displayed in 4 levels.
In addition, the degree of adhesion in the detector can be grasped while installed in piping, which contributes to the reduction of inspection man-hours.

Sensor Empty Check

The electromagnetic flowmeter can not perform accurate measurement if the inside of the detector is empty (non-full).
In ADMAG AXW, by constantly monitoring the condition in the piping, it contributes to the realization of continuous and stable flow measurement.