I'm doing integral flow calculations on the DX1000/DX2000. I want to reset the integral flow every hour and every day, but how should I configure that?

(1) As an example, enter the following formulas for calculating flow on MATH channel 1 and MATH channel 2.

(2) MATH channel 1 resets hourly, and MATH channel 2 resets daily.
To set the reset timing, select MENU key > [to Setting mode] > Setting menu tab > MATH channel > TLOG rolling average, turn reset of each MATH channel ON/OFF, and specify a reset timing.

Set the reset timing separately under "Timer" or "Match time timer".

Gerelateerde producten & oplossingen

  • Button Operated DX1000/DX2000

    The Daqstation DX1000/2000 series is a data acquisition system with display. Its HMI supports custom graphics for industry applications, audit trail and advanced security conforming to FDA 21CFR Part 11.

  • Removable Chassis DX1000N

    The DX1000N features a removable chassis via the front panel of the instrument. This allows easy access and maintenance of internal components of the DX1000N.