I want to start a control program when the time reaches that of the SMARTDAC+ GX/GP series' match time timer, but is that possible?

Yes.
・Under System settings > Internal switch settings, set the internal switch type to Manual.
・Under Event action, set the event type to Match time timer, and the action type to Internal switch.
・Under Control event action, set the types to Internal switch, Operation, and Program run start.

Related Products & Solutions

  • Touch Screen GP10/GP20

    The SMARTDAC+TM GP10/GP20 is a portable paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices. GP utilizes AI. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

    See More
  • Touch Screen Paperless Recorder GX10/GX20

    The SMARTDAC+TM GX10/GX20 is a panel mount paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices. GX utilizes AI. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

    See More

Top