Bluetooth communication is an option. Check that suffix code /C8 is specified.
Also, even if the Bluetooth function is ON, you can't perform communications if the GM10's BT lamp is off. If that is the case, turn it ON (operation mode) by holding down the USER key on the GM10 for 3 seconds or longer.
Related Products & Solutions
-
Modular GM10
SMARTDAC+TM GM10 data logger has a modular architecture that can acquire necessary data. By supporting not only I/O but also many communication protocols such as 920MHz wireless, Modbus and so on. Monitor and setting changes are available through Bluetooth. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.