Austria AT   
Update the VJQ2 pulse to analog converter to the VJQ8. What should I specify when ordering with the same settings as the existing VJQ2 for the Input Conversion mode and input filter specified at the time of ordering?
  • Home
  • Infothek
  • Publikationen
  • FAQs
  • Update the VJQ2 pulse to analog converter to the VJQ8. What should I specify when ordering with the same settings as the existing VJQ2 for the Input Conversion mode and input filter specified at the time of ordering?

Update the VJQ2 pulse to analog converter to the VJQ8. What should I specify when ordering with the same settings as the existing VJQ2 for the Input Conversion mode and input filter specified at the time of ordering?

Input Conversion mode and the input filter must be specified as follows:

  • Input Conversion mode
    Specify the F/V conversion.
     
  • Input filter
    Check the status of the existing filter setting switch (VJQ2) and select On or Off.
    On the VJQ2, the input filter is set by turning the filter setting switch (volume on the front panel) On or Off.
Top