This product acts as a battery-powered wireless pressure sensor in combination of “XS530 Pressure Measurement Module” and “XS110A Wireless Communication Module”, and it is suitable for Industrial IoT (IIoT) applications. Wireless Pressure Sensor has the function of measuring the gauge pressure of gases and liquids in a piping.
This product designs to realize easy installation for a production site to support direct installation into a piping and wetted material has highly resistant to corrosion.
Supporting Hazardous Location Installation
The XS530 in combination with the XS110A can be installed in Zone 1 areas, such as petrochemical plants, paint plants, steel plants, where flammable gas or vapor may exist.
Long-Distance Communication on License-free Bands
This sensor has adopted LoRaWAN. LoRaWAN has excellent sensitivity reception, good radio interference resistance, and offers a communication distance of 10 km or more in an ideal communication environment. This sensor can be installed this sensor anywhere you want over vast area.
Modular Structure
The module structure enables replacing the battery without removing the XS530 Pressure Measurement Module from the piping, and it makes smooth maintenance of the sensor.
Excellent Environmental Resistance with Battery Powered
The XS110A supplies power to the XS530 from a built-in battery. In combination with XS530, it acts as a battery-powered wireless sensor with the environmental resistance which is required for plant installation. Without any power cabling works, it can be installed everywhere in a plant.
Configuration And Status Monitoring Using Smartphone
Using an Android-based smartphone with NFC (Near Field Communication) interface makes configuration and status monitoring of sensors simple and intuitive.
Details
XS110A Wireless Communication Module
WIRELESS SPECIFICATIONS | Communication Protocol | LoRaWAN Class A EU868, AS923, US915 |
---|---|---|
Data Rate | 250 to 11000 bps*1 | |
Frequency | Available frequency bands vary depending on the country. Please check General Specifications for details. |
|
Radio Security | AES 128-bit encryption | |
RF Transmitter Power | Max. 7 dBm | |
Antenna | Built-in Omni-directional antenna | |
POWER SUPPLY SPECIFICATIONS | Battery | Lithium thionyl chloride battery (size D): 1 unit Rated voltage: 3.6 V Rated capacity: 19 Ah |
PERFORMANCE SPECIFICATION | Update Time | 1 minute to 3 days |
FUNCTIONAL SPECIFICATION | Output Signal | LoRaWAN (EU868; EU, AS923; Southeast Asia, US915; North America) |
NFC Interface | NFC Forum Type 2 Tag | |
INSTALLATION ENVIRONMENT | Ambient Temperature Limits | Operating: –40 to 85 °C (–40 to 185°F) Storage: –40 to 85 °C (–40 to 185°F) |
REGULATORY COMPLIANCE STATEMENTS | Degrees of Protection | IP66/IP67 and Type 4X Apply when connected to the Measurement Module. |
Explosionproof | ATEX, IECEx | |
PHYSICAL SPECIFICATIONS | Housing Material | Plastic (PC) |
Weight | 300 g (0.66 lb)*2 |
*1: Available data rate vary depending on the country.
*2: Without battery
XS530 Pressure Measurement Module
MEASUREMENT RANGE | Pressure | Gauge Pressure *1 Measurement Range: −0.1 to 5 MPa*2 (−14.5 to 720 psi) Maximum Pressure: 7.5 MPa (1080 psi) |
---|---|---|
Temperature | –40 to 85°C (–40 to 185°F) | |
PERFORMANCE SPECIFICATIONS | Measurement Accuracy | Pressure*3: ± 0.25% of Full scale Temperature: ± 5°C typ. |
Update Time | 1 minute to 3 days | |
Battery Characteristics | Battery life is 10 years under the following conditions*4 • Ambient temperature: 23 ± 2°C • Update Time: 1 hour |
|
FUNCTIONAL SPECIFICATION | Fluid to be Measured | Gas, Liquid |
INSTALLATION ENVIRONMENT | Ambient Temperature Limits | Operating: –40 to 85°C (–40 to 185°F) Storage: –40 to 85°C (–40 to 185°F) |
Process Temperature Limits | –40 to 120°C (–40 to 248°F) | |
REGULATORY COMPLIANCE STATEMENTS | Degrees of Protection | IP66/IP67 and Type 4X Apply when connected to the XS110A. |
Explosionproof | ATEX, IECEx | |
PHYSICAL SPECIFICATIONS | Process connection | 1/2 NPT female, 1/2 NPT male |
Housing Material | Stainless Steel | |
Material of Process Connection | Diaphragm: Hastelloy C-276*5 Process Connector: 316L SST*6 |
|
Weight | 600 g |
*1: Pressure measurement span cannot be changed
*2: Refer to Fig.1 if the pressure is below atmospheric pressure.
*3: Measurement Accuracy will be changed when electromagnetic noise applied.
*4: Environmental condition such as vibration may affect the battery life.
*5: Hastelloy C-276 or ASTM N 10276(equivalent to Hastelloy C -276)
*6: 316L SST or ASTM grade 316L
Sushi Sensor App
This software is used to perform the setting and status check of this product via the NFC interface.

Operating Environment | Item | Recommended System Requirements |
---|---|---|
OS | Android 5.1.1 or higher | |
CPU | Snapdragon 800 or better | |
Resolution | 1280 x 720 dots or more | |
NFC | Readers, Writer | |
GPS | Optional |
Middelen
Osaka Metro selected Yokogawa's Sushi Sensors to monitor vibration of huge ventilators.
Monitoring vibration trends prevents unexpected failures of air-conditioning systems in subway stations.
Kyowa Hakko Bio monitors vibration trends with Yokogawa's Sushi Sensors to prevent unexpected equipment failures.
By using eServ, sensor data and maintenance information are shared with everyone involved in manufacturing.
Remote monitoring of supply pump conditions in the agitation process reduces operator rounds and contributes to stabilization of the product quality.
Automated wireless pressure monitoring at a polyolefin facility producing high-density polyethylene and polypropylene prevents costly catalyst contamination and production losses.
Downloads
Brochures
Gebruikershandleidingen
- Sushi Sensor Series Software Edition (5.1 MB)
- XS110A Wireless Communication Module (1.3 MB)
- XS530 Pressure Measurement Module (1.8 MB)
Algemene specificaties
- XS110A Wireless Communication Module (939 KB)
- XS530 Pressure Measurement Module (997 KB)
Tekeningen
- XS110A Wireless Communication Module (740 KB)
- XS530 Pressure Measurement Module (759 KB)
Videos
The measurement, collection and utilization of equipment data by the Industrial IoT (IIoT) wireless solution “Sushi Sensor” contributes to efficient equipment maintenance and open a new road to a Smart Factory.
Op zoek naar meer informatie over onze mensen, technologie en oplossingen?
Contact