| Flow Configuration Wizard |
| |
|
There are two Kinds of flow calculation modes called Auto compensation mode and Basic flow calculation mode. The dynamic flow calculation of mass flow is reguired to configure using Auto compensation mode. |
| |
- Auto compensation mode |
| |
|
EJXMVTool™ employs a series of dialog windows that simplify the process of configuring primary devices and fluid physical properties. With this software tool, you can be assured of getting the settings right for mass flow measurement and dynamic compensation, and making the fullest use of transmitter’s capabilities. It has the physical properties data for 126 fluids. |
| |
- Basic flow calculation mode |
| |
|
In addition to auto compensation mode, flow operation and density compensation can be performed by manually specifying flow factors such as the reference temperature, reference static pressure, and Kfactor, using known configuration information. |
| |
| Flow Parameter Management |
| |
|
EJXMVTool™ has a variety of functions that make maximum use of valuable data that you have obtained. For example, a set of flow configuration data can be saved for downloading to or uploading from a transmitter and is also available in the CSV format, which is useful for the analysis of flow characteristics. |
| |
| Transmitter Parameter Management |
| |
|
The general parameters of the device can be edited or stored in Online/Offline parameter menu window. |
(37KB)
