LL100
Hinweis: Dieses Produkt wurde eingestellt am

The software package that enables you to set the GREEN Series controllers configuration parameters via the optical communications adapter attached on controller front panel. Parameter data upload and download, read, write and print parameters, file management, trend display, tuning functions are available.

Publikationen

The LL100/LL200 installation failed.
(ns-faq-green-9099-soft)
Please check the following. Have you met the minimum system requirements? Are you using full-width characters for the login user name?  
Yes, the latest version of the LL100/LL200 can connect to instruments with serial ports, as in previous versions.
In the upper part of the screen, from the Edit item, select Segment delete.
Yes, by using the Multilogging function. However, all data are not saved. Only data that was saved to CSV. Unsaved data is discarded.
It requires a USB port.
Yes. Click the Open menu command. In the user file open dialog box, under File type, select the extension of the old tool file, or All files. Select the files you want to open. The file name extensions of the old tool are 4td, 5td, 5pd, 7td, and...
What is the Batch copy function?
(ns-faq-green-9108-soft)
The Batch function is for copying all program patterns of a single controller. <Collective reading> All patterns in a program pattern controller are saved, 1 pattern per file, to a specified folder (on a PC hard disk). Ex.) If you perform coll...
Yes, if it is an enhanced model. If the product has been enhanced, an "E" appears on the front panel model name, as in "UT320E."
1 to 3600 seconds. However, if there are many units connected and the setting is short, processing may not occur within the trend interval. If this happens the on-screen communication status lamp will turn red, and you should slow the interval settin...
Up to 65000 times' worth of data can be saved, regardless of the trend interval. Note that if 65000 is exceeded, the oldest data is replaced by new data.
For example, if you select UP550 format and "open" a UP750 file, the format will be UP750. But if you "Open program pattern data," you will open the UP750 file in UP550 format. By using the "Open program pattern data&quo...
No. LL100/LL200 has been discontinued.
Yes. Use the Multimonitor function.
Can I extend the LL100/LL200 cable?
(ns-faq-green-9093-soft)
Yes. Use a standard USB extension cable. Note that per the USB standard you should not use an extension cable longer than 4 meters.
CSV file format.
A total of 16 loops can be monitored. Cascade control entails using 2 loops per controller, therefore 8 units could be connected.
What are the LL100 and LL200?
(ns-faq-green-9086-soft)
They are software programs for the Green series. In addition to setting parameters, the LL100 comes with functions including program pattern creation, tuning, and multi monitoring. The LL200 has the functions of the LL100 plus a UT750/UP750 custom co...
The adapter might not be attached properly, or the adapter batteries (2 x AA) may be spent. If using the UT320/321/350/351, check whether the LL parameter on the main unit is ON.
The following OS are supported. Windows XP (Home Edition/Professional) (x32) Windows Vista Business (SP1) (x32) Windows 7 Professional (x32/x64)  
No. LL100/LL200 has been discontinued.
2.7 meters.
The software itself, USB drivers, adapter, cable, and user's manual.
The UT300/400/500/700 series, and the UP350/351/550/750. However, the LL200 custom computation function is only compatible with the UT750/UP750.
For single-loop models such as the UT351, up to 16. For 2-loop control on the UT750, up to 8.
By design, UP350/351 program patterns are set by using the parameter setting tool.
As for individually writing parameters via CC-Link, changing OUT area values constitutes a write request. In your case, since the OUT area value hasn't changed from the previous value, the SP value is notoverwritten. As a fix, periodically copy t...
Yes, you can use the GREEN-UTAdvanced parameter data conversion tool (available as free download). Using the LL100/LL200 parameter setting tool, save the GREEN series parameters to a file, convert them using the conversion tool, then apply the settin...

Downloads

Möchten Sie weitere Informationen über unsere Mitarbeiter, Technologien und Lösungen?

Kontakt

Top