Flexible operation of CFB facility by independent power producer (IPP)
Itoigawa Power Plant, Japan
- 149MW coal-fired power plant operated by IPP
- First use of circulating fluidized bed (CFB) boiler by IPP in Japan
- Fly ash recycled at adjacent cement plant
- Daily operation in swing mode and shutdown/startup responding to shifts in electricity demand
- Controlled by Yokogawa's CENTUM system
The Itoigawa Power Plant was constructed adjacent to a cement plant in Itoigawa City, Niigata Prefecture, and is operated by an IPP that supplies electricity to Tohoku Electric Power, one of Japan's major power companies. The use of a 149 MW coal-fired CFB boiler in this power plant is a first for an IPP in Japan, and this effectively reduces NOx emissions. This power plant also recycles at an adjacent cement plant the fly ash that is the byproduct of coal combustion.
The Challenges and the Solutions
Flexible response to shifts in electricity demand
To adjust to shifts in electricity demand, the customer runs the Itoigawa Power Plant in swing mode. During the daytime hours of high electricity demand, the plant is run at up to 100% of its capacity, with output being adjusted flexibly in response to commands from a central load dispatching center. At night the plant is operated at just 40% of its capacity.
Daily operation example in swing mode
Automatic shutdown/startup capability
Yokogawa fully implemented the operation logic for its highly-reliable CENTUM CS control system to match frequent load changes and provide a high degree of flexibility in the system's operation.
The CENTUM control system also supports automatic shutdown/startup to keep to a minimum the manual checks performed by operators. They are only required to check the master control sequence for stopping and starting the plant facilities, which ensures a safe, smooth shutdown and startup.
Plant automatic sequence monitoring display
Since commencing commercial operation in July 2001, the Itoigawa power plant has been operating reliably and efficiently under its Yokogawa CENTUM control system while employing CFB technology to generate environmentally-friendly electricity.
Itoigawa Power Plant, Japan
Owner: Itoigawa Power Inc.
Annual average usage rate: 40%
Control system: CENTUM CS
In the mid 1970s, Yokogawa entered the power business with the release of the EBS Electric Control System. Since then, Yokogawa has steadfastly continued with the development of our technologies and capabilities for providing the best services and solutions to our customers worldwide.
Yokogawa has operated the global power solutions network to play a more active role in the dynamic global power market. This has allowed closer teamwork within Yokogawa, bringing together our global resources and industry know-how. Yokogawa's power industry experts work together to bring each customer the solution that best suits their sophisticated requirements.
Thermal power using coal, oil or gas as fuel accounts for the majority of electric generation throughout the world.
Productos y Soluciones Relacionadas
Distributed Control System (DCS)
Our distributed control system (DCS) enables automation and control of industrial processes and enhanced business performance. Over 10,000 plants entrust Yokogawa DCS to deliver their production goals.