Yokogawa has more than 100 years experience in the development, design, and manufacture of various flow meter technologies. With many industry firsts, Yokogawa continues to lead innovation in flow measurment.
Flow Meter Product Family
● = best choice; ○ = possible; - = not applicable
|ROTAMASS TI||ADMAG TI||digitalYEWFLO||Glass Rotameter||Metal Rotameter|
|Abrasive / Slurry||○||●||-||-||-|
|Properties||Low pressure loss||-||●||●||-||-|
|Accuracy||± 0.1 % of rate||± 0.15 % of rate||± 0.75 % of rate||1.6 % (qG = 50 %)||1.6 % (qG = 50 %)|
|Maximum diameter||200 mm||1,800 mm||400 mm||2 1/2 inch||150 mm|
ROTAMASS is de integrale en de remote versie Coriolis massa-flowmeter. Beide types hebben zeer verfijnde digitale signaalverwerkingselektronica, zodat een nauwkeurige en stabiele massa-flowmeting wordt bereikt.
Yokogawa's experience with magnetic flowmeters spans decades. Our magnetic flow meters provide flexible configurations for industrial use in most areas.
Yokogawa has been synonymous with Vortex flow meters since pioneering the industrial vortex flow meter nearly four decades ago. Over those decades, Yokogawa has continued to be at the fore front of vortex technology; so, today, Yokogawa offers a large variety of vortex flow meters, including custom made designs.
The Variable Area Flowmeter is one of the oldest and mature principles in flow measurement with its simple design: a float rises inside a conically shaped glass tube as the flow increases and its position on a scale can be read off as the flow rate. Since this measuring method is purely mechanic, it as simple as it is reliable.
The Coriolis flow meter has many features such as direct measurement of mass flow and measurement of fluid density, which other flow meters do not support. Therefore, since being introduced for practical use in the late 1970s, its market has rapidly expanded in many industries such as oil, chemicals, and foods.
Vortex flow meters were put into practical use in the 1970's; thus their history is relatively short. They have been mainly used at petrochemical plants because of their two main features, the fact that they do not have any mechanical moving parts and are maintenance-free. Yokogawa started research and development on the vortex flow meter before 1970.
Kunnen flowmeters industriële autonomie ondersteunen? En helpen vormgeven? Tijdens de FHI themadag Flow presenteerde Jorrit Walgien de slimme flowmeter. Die zorgt niet alleen voor de meest optimale processen, maar verhoogt ook de efficiëntie van het personeel omdat het hun werk eenvoudiger maakt.
Op zoek naar meer informatie over onze mensen, technologie en oplossingen?Contact