Flow Meters

What Are Flow Meters?

Flow meters measure the volumetric or mass flow rate of a liquid or gas. Yokogawa's range of flow meter instruments include vortex, magnetic, variable area, Coriolis, and differential pressure flow meters.

Flow Meter Product Family

● = best choice; ○ = possible

  Magmeter Coriolis Vortex Variable Area/Rotameter Differential Pressure
ADMAG TI ROTAMASS TI VY / digitalYEWFLO RAMC RAGN DPharp
Measurement Volumetric flow
Mass flow
Temperature      
Density, Concentration          
Fluid Type Steam      
Gases    
High-viscosity liquids
Low-viscosity liquids  
Conductive liquids  
Non-conductive liquids    
Properties Low pressure loss        
Solid content        
Custody transfer          

Resources

Overview:

Yokogawa’s latest generation of ADMAG AXG Series is the most suitable magnetic flowmeter with adhesion level diagnosis and dual-frequency excitation method provides stable flow measurement even under high flow noise in the severe applications like the flow of aluminum slurries.

Industries:
Overview:

Angel Yeast Co., Ltd. is a leading global player in the yeast and deep-processed products industry, with production bases in 13 cities worldwide. Their yeast series products account for over 17% of the global market, ranking second globally.
In their production process, additives like nitrogen, phosphorus, and potassium are crucial, requiring accurate measurement and stabilization to ensure the final product meets specifications. Yokogawa proposed the AXG electromagnetic flowmeter as a solution, providing dual-frequency excitation for both rapid response and reduced noise.

Industries:
Overview:

Using recycled oil as an energy source poses a challenge due to its inconsistent composition and potential impurities. Conventional flowmeter technologies are impractical in such cases. The CA Series, however, reliably and stably measures the flow of recycled oil mixed with water.

Industries:
Overview:

Accurate and reliable measurement of wash oil in a high temperature process to avoid solidification of the chemical, it is essential to adjoin heat and insulation to the piping and equipment. Therefore, thermal management of the pipe runs is required, to avoid any heat loss in the fluid to maintain the fluid properties. 

Industries:
Overview:

During MSG manufacturing it is crucial to control flow during the neutralization process. Unfortunately, traditional magnetic flowmeters encounter accuracy issues due to coating on electrodes from liquids like crystal, slurry, and high-viscosity fluids. Learn how our innovative technology ensures stable measurements even with challenging fluids. Don't miss out on improved accuracy and reduced maintenance downtime.

Industries:
Overview:

Accurate and durable magnetic flow meters (magmeters) were difficult to maintain in the process as the corrosive and abrasive nature of the process degraded their operation. That led to leaks that not only reduced the flow but also contaminated the product and the magmeters. Since Sigura maintained strong vigilance, the company needed to replace some magmeters monthly...

Industries:
Application Note
Overview:

Avoid flashing issues while loading cryogenic liquids with safe, reliable, and accurate density fluid measurements utilizing Yokogawa’s industry-leading Coriolis flowmeter to eliminate measurement issues and increase the accuracy of inventory. 

Overview:

Brewers recognized that correcting flowmeter inefficiencies in out-of-date technology would help them achieve the increased and consistent throughput they needed. 

Industries:
Overview:

Yokogawa’s ADMAG TI - AXG magnetic flowmeter (magmeter) with EtherNet/IP is used to measure the water moving from the pump to the snow cannons. The accurate measurement allows the operator to monitor and control the water in the mixture to produce artificial snow with the perfect consistency.

Industries:
Overview:

In the food and beverage industry, government regulations for whisky production require compliance of distillation strengths to strict limits. Yokogawa’s ROTAMASS TI Coriolis mass flowmeter is well-matched for the application with its density calibration for ethanol or water percentage and a special calibration for maximum accuracy and stability. The mass flow meter’s dual bent tube technology and advanced software enabled the customer to measure the very small and sensitive range required. Yokogawa commissioned the mass flowmeter onsite to ensure the correct installation and commissioning from the outset, affording Total Insight through the entire product lifecycle. 

Industries:
Overview:

The reliable accuracy of the AXG magmeter is a result of Yokogawa’s proprietary, dual-frequency excitation method, which combines traditional high/low-frequency excitation methods to ensure greater stability and quicker response even if noise or other problems are present in the line. The customer was very pleased with the result, as it allows him to automatically mix yogurt with cherries, which was previously impossible due to the measurement deviations.

Industries:
Overview:

A milk tanker is typically fitted with a pump and flowmeter that records the volume of milk loaded from each individual farm. Confirmation of the total volume of milk delivered to the dairy plant is performed either by weighing the tanker or via flowmeters in the tanker bays.

Industries:
Application Note
Overview:

Accurate measurement of the oil concentration would allow the heat/steam to be adjusted. Increases efficiency and saves money. 

Industries:
Overview:

To meet state requirements for calibration checks, use Meter Verification (part of the Total Insight concept of the ADMAG TI - AXG) to verify the calibration and functionality of each meter. The reliable accuracy of the AXG magmeter results from Yokogawa’s proprietary, dual-frequency excitation method. It combines traditional high/low-frequency excitation methods to ensure greater stability and quicker response even if noise or other problems are present in the line. With EtherNet/IP, an operator can initiate a verification from the HMI to ensure the gallery is running optimally.

Overview:

The condiment facility staff had success with Yokogawa’s ADMAG TI AXG magnetic flowmeters in other applications. When they learned EtherNet/IP communication was now offered on the ADMAG TI - AXG, they chose to use the Yokogawa magmeter solution on the mustard grinding lines.

Industries:
Overview:

Read this eBook to learn how to best leverage the latest measurement instrumentation to avoid incidents and improve productivity. You will also find valuable information about overcoming common CIP challenges and stories of success.

Industries:
Overview:

The Coriolis flow meter has many features such as direct measurement of mass flow and measurement of fluid density, which other flow meters do not support. Therefore, since being introduced for practical use in the late 1970s, its market has rapidly expanded in many industries such as oil, chemicals, and foods.

Yokogawa Technical Report
Overview:

Vortex flow meters were put into practical use in the 1970's; thus their history is relatively short. They have been mainly used at petrochemical plants because of their two main features, the fact that they do not have any mechanical moving parts and are maintenance-free. Yokogawa started research and development on the vortex flow meter before 1970.

Overview:

Thanks to a two year upgrade project, Foster's Yatala brewery is now one of the country's most efficient integrated brewing and packaging operations. More than 1,100 measurement and control devices from instrument manufacturer Yokogawa Australia will help keep it that way.

Industries:
They help remove stray energy or noise as it builds up in the flow process by grounding it. They can even help protect the magmeter liner from damage in harsher processes.
Edition 1
Overview:

They help remove stray energy or noise as it builds up in the flow process by grounding it. They can even help protect the magmeter liner from damage in harsher processes.

Sizes 25 to 200 mm (1 to 8 in): 10 µS/cm or greater.
Sizes 1000 mm (40") and below: 20 µS/cm or greater Sizes 1100 mm (44") and above: 50 µS/cm or greater 
Sizes 15 to 100 mm (0.5" to 4"): 0.01 µS/cm or greater Sizes 150 & 200 mm (6" & 8"): 1 µS/cm or greater 
For an integral flowmeter: 12 W For a remote flowtube combined with an AXFA11 converter: 20 W For a remote flowtube combined with an AXFA14 converter: 12 W 
The standard accuracy for the output of an AXF is 0.35% of Rate/Reading. Yokogawa also offers a high grade accuracy calibration option which provides an accuracy of 0.2%.
Sizes 2.5 to 10 mm (0.1 to 0.4 in): 5 µS/cm or greater Sizes 15 to 125 mm (0.5 to 5 in): 1 µS/cm or greater Sizes 150 to 400 mm (6 to 16 in): 3 µS/cm or greater When conductivity is below the 3 µS/cm, we recommend using ...

Downloads

Videos

Overview:

This video covers the navigation and basic structure of the Yokogawa Magnetic Flow Meter ADMAG TI - AXG with EtherNet/IP webserver.

>  Video: How to Connect to Webserver

Overview:

To effectively control and optimize industrial processes, trusting measurements from flowmeters is vital.

News

Looking for more information on our people, technology and solutions?

Contact Us

Top