Belgium (NL) BE-NL   
Error 353 occurs when sending a communication command (such as ORec) to operate or configure the SMARTDAC+ GX/GP Models with the Advanced Security function (/AS). What should I do?

Error 353 occurs when sending a communication command (such as ORec) to operate or configure the SMARTDAC+ GX/GP Models with the Advanced Security function (/AS). What should I do?

If the touch operation of the security setting is Login and communication is Off, you can log in through communication but you can’t send configuration or operation commands.
To change this, go to Settings > Security Settings > Basic Setting and set communication to Login.

Gerelateerde producten & oplossingen

  • Touch Screen GP10/GP20

    De SMARTDAC+TM GP10/GP20 is een draagbare papierloze recorder met een modulaire architectuur op het achterpaneel en heeft een dataloggingfunctie om de benodigde gegevens te verkrijgen. Door niet alleen I/O te ondersteunen, maar ook veel communicatieprotocollen, kunt u verbinding maken met verschillende apparaten. AI functioneert standaard. Ondersteuning van FDA 21 CFR Part11 en AMS2750E/NADCAP.

  • Touch Screen Paperless Recorder GX10/GX20

    The SMARTDAC+TM GX10/GX20 is a panel mount paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices. GX utilizes AI. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

Top