Add measurement points in small space far from control panel

Download (352 KB)

Monitoring for equipment

 

Overview

The high performance of products and parts requires a variety of tests.
Customers would like to increase the number of sensors and measuring instruments required for these increasingly diverse test equipment, but the space for existing equipment is limited and it is not easy to add additional unit.
To address this issue, the Multi-Sensing Remote I/O Analog Sensing Unit VZ20X's compact size allows it to be installed in gaps between existing test equipment. In addition, DATA collection can be transmitted to the host system via Modbus/TCP for easy monitoring and recording of the test.

Automotive industry

Customer Benefits

  • Compact size for installation in equipment gaps
  • Various sensors can be measured in one VZ20X
  • Easy DATA monitoring and recording with Data Logging Software GA10 and VZ20X

Problem

  • There are some other signals from torque meter or several sensors at an equipment to be connected from Data Logging Software GA10 to monitor them but there is not enough space to add Data Logger GM10 modules in the control panel
  • Moreover, the control panel is far from the equipment

Solution

  • Put VZ20X close to the sensor then connect with GA10 via ethernet

Monitoring for equipment

Features

  • VZ20X is compact and installable any equipment
  • Easy data monitoring with Ethernet cable and GA10

Product recommendation

  • Multi-Sensing Remote I/O Analog Sensing Unit VZ20X
    A sample program for system construction is introduced.
    *As of April 2022, the Analog Sensing Unit VZ20X is sold in Asia Pacific and the Middle East areas.
  • Data Logging Software GA10
    60-day free trial is available.
  • Data Logger GM10

Looking for more information on our people, technology and solutions?

Contact Us  

Related Products & Solutions

  • Analog Sensing Unit VZ20X

    VZ20X is a data measuring device that helps achieve “predictive maintenance,” whereby performance degradation and failures in production equipment are prevented before they occur. Providing a solution for optimally timed equipment inspections and replacements, it addresses the issues of reduced uptime and safety caused by failures.

    See More
  • Data Logging Software GA10

    The latest software that enables you to build a DAQ system without programming. Designed for maximum compatibility with Yokogawa recorders, data loggers, temperature controllers, and power monitors, GA10 can also acquire data via Modbus communications.

    See More
  • Modular GM10

    SMARTDAC+TM GM10 data logger has a modular architecture that can acquire necessary data. By supporting not only I/O but also many communication protocols such as 920MHz wireless, Modbus and so on. Monitor and setting changes are available through Bluetooth. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

    See More

Top