Digital indicating controller CP (Carbon Potential) calculation control

Overview

Adding the CP calculation option to the advanced UT75A Digital Indicating Controller enables CP (Carbon Potential) control. CP calculation can be carried out with just one line of a UT75A ladder program.

* High impedance input is required for zirconia sensors. Select auxiliary analog (remote) input.

The UT75A's CP calculation supports all manufacturer's zirconia oxygen sensors. For concerns about calculation errors, you can apply correction using polygonal line bias. If you will be using your own CP calculations, you can easily create original ladder commands with the LL50A parameter setting software's custom ladder function. The formulas of you original ladder commands can be password protected.

Also, the UT75A comes standard with a program pattern function. CC-Link, DeviceNet, and PROFIBUS-DP can be installed as options, and easy connection with PLC is available allowing transfer of program patterns to the UT75A from a PLC that manages recipes, and programs can be run.

Running program patterns

• Program pattern with up to 20 segments
• Program pattern can be run with 2-loops

Easily switch recipes with a PLC

• CC-Link, PROFIBUS-DP, and Device Net are supported, making it easy to link up with PLCs that manage recipes.