SA stands for SENCOM Adapter (Model SA11). This is one piece of a new product platform. The SENCOM 4.0 series has been released to replace the original SENCOM product line from Yokogawa. The new SENCOM 4.0 SA11 Smart Adapter uses a similar digital process to measure the process values, store data, perform calibrations, and report data to a host system. One obvious difference is that the SA11 Smart Adapter is a separate device, not permanently attached to the sensor as the original SENCOM sensors are. The SA11 is part of our SENCOM 4.0 platform, consisting of an FLXA402 transmitter, a Sensor with a Variopin connector and ID Chip (i.e., FU20-VS or FU24-VS), and Cables.
Related Products & Solutions
-
All-in-One pH/ORP Sensor Series FU20 and FU24
The FU20 and FU24, all-in-one pH and ORP, sensors show how Yokogawa applies the motto "Simple is best" to sensor technology.
-
Digital SMART SENCOM™ Adapter, SA11
Reusable SMART adapter, requiring only the analog sensor to be disposed of when it reaches the end of its lifetime. With the SENCOM 4.0 platform, Yokogawa delivers reduced costs and waste while contributing to its long-term business goals of a sustainable future for all.
-
Multi Channel 4-Wire Analyzer FLXA402
Available in single or multi-sensor measurement