For a data logger to monitor, test, and analyze asset health and performance, it records sensor data over long periods of time. Yokogawa data loggers surpass the scalability of standard data loggers by utilizing a proprietary block architecture that enables you to easily and flexibly combine various modules, and add expansion modules for up to 450 ch of input (GX/GP). They offer superior savings on rewiring labor and maintenance because you can add or remove modules even after installation.
Our data loggers are recognized in the industry for their outstanding measurement accuracy, reliability, noise resistance, and ease-of-use. They support US FDA 21 CFR Part11 (regulations on electronic records and electronic signatures), EU-GMP Annex11, and other associated guidelines for data management as required for development and manufacture in the pharmaceutical and foodstuff industries.
Data Loggers also support data integrity in accordance with ALCOA+. In addition, AMS2750E which is required for heat treatment in the aerospace industry is supported.
- Connection communication function : 920MHz wireless connection, Modbus/TCP, Modbus/RTU, EtherNet/IP, SLMP, OPC-UA, Bluetooth (GM10)
- Network function : HTTP, FTP, SNTP, DHCP, E-mail (SMTP)
SMARTDAC+TM GM10 data logger has a modular architecture that can acquire necessary data. By supporting not only I/O but also many communication protocols such as 920MHz wireless, Modbus and so on. Monitor and setting changes are available through Bluetooth. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.
The SMARTDAC+TM GX10/GX20 is a panel mount paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices. AI function as standard. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.
The SMARTDAC+TM GP10/GP20 is a portable paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices. AI function as standard. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.
Data Loggers support various applications and measurements up to 450 channels (GX/GP).
The fully modular I/O design allows you to build the system with the channels you need today, and expand the unit's capability any time in the future by purchasing and installing additional modules.
|Analog input module||DC voltage, DC current, thermocouple, RTD, contact||GX90XA||GM10, GX, GP|
|High withstand voltage AI module: Max. common mode voltage 600V||GX90XA-10-V1|
|High Speed AI||GX90XA-04-H0|
|4-wire RTD, 4-wire resistance (solid state relay scanner type)||GX90XA-06-R1|
|Analog output module||Current output||GX90YA|
|Digital input module||Remote control input or operation recording||GX90XD|
|Digital output module||Alarm output||GX90YD|
|Digital input/output module||Remote control input or operation recording/alarm output||GX90WD|
|Pulse intput module||Pulse signal data acquisition, integral count||GX90XP|
|PID control module||PID module||GX90UT|
|Wireless input unit for SMART 920||Wireless, temperature, humidity||GX70SM＊|
* Used in combination with the main unit.
The development of difficult to recover unconventional energy resources, is progressing. Figure 1 shows an example of how unconventional heavy oil is extracted from tar sand by reducing its viscosity with steam. To ensure efficient mining, changes in the underground temperature distribution will need to be monitored.
- Data Acquisition Software Suite DAQWORX (790 KB)
- AI Product Solution Book Download
- Electrolyzer Solution Instruments and Solution for Ion-Membrane Electrolyzer Plant Application (3.4 MB)
- SMARTDAC+ Data Acquisition & Control Data Acquisition System GM (8.3 MB)
- DAQMASTER MX100/MW100 (4.2 MB)
- SMARTDAC+ Data Logging Software GA10 (5.3 MB)
Looking for more information on our people, technology and solutions?Contact Us