SMART 920 - 920 MHz Wireless Data Acquisition
Changing the way you see your process data
The SMART 920 is a wireless recording solution for the SMARTDAC+ family of recorders and data loggers. With the SMART 920, a GX20, GP20 or a GM10 will become a completely self-contained industrial data acquisition system that supports data collection from both wired and wireless points.
When you need to add measurement points that cannot be easily reached, or when it becomes expensive or difficult to run wire to that point, a wireless solution is recommended.
Equipped with 920 MHz Mesh network technology, the SMART 920 has a longer range than one in the 2.4 GHz band typically used in wireless LAN applications. The 920 MHz wireless signal also gives it a greater reach around obstacles, making it favorable for long distance or highly obstructed environments.
Note: The use of SMART 920 enabled units is limited to the United States, Korea and Japan. Please refer to the instruction for proper installation and use.
Flexible transmission of important data
Flexible wireless communication
- Communication between the main unit and a SMART 920 remote unit can be established up to approximately 1 km in line of sight.
- The intelligent mesh network automatically recognizes unstable wireless links and re-routes data to a clear channel.
High speed, high reliability, multi-channel communication
- It is possible to communicate with 100 slave devices at 1 second update speeds.
- We can support a wide range of applications from small single point to large multi-point applications.
Notification by alarm when communication is disconnected
- In the unlikely event that wireless communications is interrupted whereas data cannot be collected, the master unit will inform you by alarm.
Can be easily installed in locations without power
-
Since the GX70SM is a compact, battery-powered wireless input unit, it can be easily mounted and used in areas without power.
Interpolation of data loss (when using GX70SM)
- If all communication routes are down, the GX70SM continues to collect data. It is possible to restore the data stored in the GX70SM into the missing record of the GX20 / GP20 / GM10.
Part 11 compliant
- SMART 920 supports electronic records and electronic signatures under FDA 21 CFR Part 11 for food, pharmaceutical and other FDA regulated applications.
Improves status and remote monitoring
Storage warehouse door status & temperature monitoring
Monitor the temperature of the warehouse and check whether a door has been left open. Customize your display for an immediate overview of your facility.
Monitor machine operating status
By using the master recorder's math function, it is possible to calculate total downtime, the number of system stops, and other operational data.
Remote monitoring of operation conditions
It is perfect for monitoring operating conditions in a clean room. Temperature and humidity measurements are necessary when manufacturing precision industrial products such as semiconductors, medicines and some foods. The following benefits are gained by using wireless.
- No wiring required
- Easily add equipment
- Reduce the number of entrance / exit times
Energy monitoring
Monitor the integrated values of electric consumption with hourly, weekly, and monthly reports, and compare with historical data. Connect your PLC to your SMART 920 wireless network.
See data in areas without power (when using GX70SM)
Temperature and humidity management of clean room
- The wireless input unit GX70SM has built-in humidity sensor. It can be used in areas with severe restrictions such as the clean rooms. Also, the inputs can be calibrated by the customer.
Improve working conditions in a factory
- Because of its excellent responsiveness to aggressive temperature changes, we are able to control the temperature and humidity inside the factory. We can see environmental and safety conditions and to take measures against heat stroke of personnel.
The SMART 920 lineup of 920 MHz equipped instrumentation can be selected and deployed based on the application and the installation environment
As a master station
As a master unit, the SMART 920 equipped units will collect and record wireless data from products equipped as slave devices.
 |
 |
 |
| Panel Mount Recorder GX20 |
Portable Data Acquisition GP20 |
Modular Data Logger GM10 |
As a mesh network relay
These devices will reliably route wireless data across the mesh network to the master station. These unit will perform as range extenders or as smart routers, directing wireless data to the next relay with the strongest connection.
|
 |
| Modular Data Logger GM10 |
Temperature Controller / Gateway UT52A/UT32A |
As a slave device
These devices collect process data that is wirelessly transmitted to the master station or repeater. Various mounting option are available. Along with simple point measurement, these units can provide a variety of I/O functions that can be monitored and controlled over the wireless network (PID control & ladder control). Remote devices that need to be monitored wirelessly but do not have wireless capabilities can be connected to the SMART 920 network by way of the Modbus gateway.
 |
 |
 |
| Wireless Input Unit GX70SM |
Modular Data Logger GM10 |
Temperature Controller / Gateway UT52A/UT32A |
Brochures
- SMART 920 920 MHz band wireless communication instrument series (For the US) (13.0 MB)
- SMART 920 920 MHz band wireless communication instrument series (For the Republic of Korea) (6.2 MB)
Instruction Manuals
- GX20/GP20 (/CM2 and /CM3 options), GM10 (/CM2, /CS2, /CM3 and /CS3 options) 920MHz wireless communication First Step Guide_US,KR (1.3 MB)
- Model UPM100 Universal Power Monitor (For the Republic of Korea) (4.0 MB)
- Model GX70SM Wireless Input Unit First Step Guide (Notes about Using This Product) (For the US and the Republic of Korea) (4.1 MB)
- Model GX20/GP20/GM10, UT52A/UT32A, UPM100 920 MHz Wireless Communication, MH920 Console International (For the US and the Korea) (12.0 MB)
- UT52A/MDL, UT32A/MDL Digital Indicating Controller (DIN Rail Mounting and Wireless Communication Type) Operation Guide (US, KR) (1.1 MB)
- Model GX70SM Wireless Input Unit User’s Manual (16.1 MB)
General Specifications
- Model UPM100 Universal Power Monitor (For the Republic of Korea) (2.6 MB)
- UT32A/MDL Digital Indicating Controller (DIN Rail Mounting and Wireless Communication Type) (For the Republic of Korea) (1.4 MB)
- GX20 (/CM2 option) GM (/CM2 and /CS2 options) 920MHz Wireless Communication (2.4 MB)
- Model GX70SM Wireless Input Unit (For the US) (2.2 MB)
- UT52A/MDL, UT32A/MDL Digital Indicating Controller (DIN Rail Mounting and Wireless Communication Type) (1.4 MB)
- GX20/GP20 (/CM3 option), GM (/CM3 and /CS3 options) 920MHz Wireless Communication (For Republic of Korea) (2.2 MB)
- GX70SM Wireless Input Unit (For the Republic of Korea) (2.3 MB)
Software
- GX70SM Input Module Firmware *Log-in Required
- MH920 Wireless Communication module (Router) Firmware *Log-in Required
- GX70SM Wireless Communication Module Firmware *Log-in Required
- MH920 Wireless Communication module (Coordinator) Firmware *Log-in Required
Drawings
- Paperless Recorder GP20 (/CM2, /CM3) (For the US and the Republic of Korea) (998 KB)
- Paperless Recorder GX20 (/CM2, /CM3) (For the US and the Republic of Korea) (1.1 MB)
- Model UT32A/MDL Controller (Mount on DIN Rail and Wireless Communication Type) (For the US and the Republic of Korea) (377 KB)
- Model UPM100 Universal Power Monitor (Wireless Communication Type) (For the Repupblic of Korea) (323 KB)
- Model GX70SM Wireless Input Unit (689 KB)