Measurement of O2 Concentrations in Recovery Flue Gas from Converter Furnace by the TDLS

Introduction

O2 measurement is used to safely recover flue gas containing a high concentration of CO from a converter furnace. With conventional paramagnetic oxygen analyzers, O2 concentrations are obtained through a sampling system to recovery flue gas. Therefore, there are problems with the maintenance and running costs of the sampling system, and time delays in measurement. The TDLS Laser Analyzer is the solution to all these problems.

Expected Benefits

  • Eliminates the need for sampling and reduces the maintenance and running costs of the sampling system
  • High-speed response, ability to apply measurement results to control the O2 concentrations, improves gas recovery rate, and reduces fuel costs through the reuse of the recovered gas
  • Continuous monitoring and highly accurate O2 concentration monitoring

Process Overview

An oxygen converter gas recovery (OG) system is a treatment system to safely recover flue gas containing a high concentration of CO from a converter furnace. Since the recovered flue gas is reused as fuel, a slow response time results in a waste of fuel resources. That is why high-speed response and high reliability are required for O2 measurements.

Example of Iron and Steel Converter Furnace Process (Block Diagram)
Example of Iron and Steel Converter Furnace Process 

Solution Details

The point is to use the TDLS capable of directly measuring the O2 concentrations after IDF, instead of conventional paramagnetic oxygen analyzers that perform measurements through a sampling system. The high-speed response and high accuracy of the TDLS for the converter furnace process enable high purity gas to be recovered with higher efficiency.

Field Data

Converter Furnace Process and Changes in Measured Values of O2 Concentration (Installation Example A)

Converter Furnace Process and Changes in Measured Values

 

Notes:Example of TDLS8000

  • Power supply: 100 - 240 VAC, 50/60 Hz
  • Purge gas: N2
    Flowrate: 5 L/min to 50 L/min
  • Dust concentration (standard): 15 g/Nm³ or less
  • An insertion tube (custom order) is used

Measurement of O2 Concentrations in Recovery Flue Gas

Industries

  • Iron & Steel

    • Iron and steel industry
    • Improve quality of products, manufacturing, and operation technologies
    • Address environmental and energy-efficiency issues
    • Create the ideal plant and evolve for mutual growth
    See More

Related Products & Solutions

×

Have Questions?

Contact a Yokogawa Expert to learn how we can help you solve your challenges.


Top