Tokyo, Japan - July 25, 2017
Yokogawa Electric Corporation (TOKYO: 6841) announces that it will release the ProSafe-RS® SIL2*1 wireless gas detection system in September.
The ProSafe-RS SIL2 wireless gas detection system will consist of a newly enhanced version of the Yokogawa ProSafe-RS SIL3 safety instrumented system (R4.03.10), Yokogawa field wireless network devices, annunciator panels, and GasSecure*2 GS01 or GS01-EA*3 wireless gas detectors.
For this system, Yokogawa will establish a total solution that will include both consulting and engineering.
Left: ProSafe-RS, Right: YFGW510
In energy and basic materials industries such as oil, gas, petrochemicals, and chemicals, a safety instrumented system is employed to safely initiate an emergency plant shutdown when a critical failure is detected, and to initiate the operation of facilities that can extinguish or prevent the spread of a fire.
A field wireless system consists of field devices that are able to communicate wirelessly with a monitoring and control system. Wireless devices have a number of advantages such as allowing installation in difficult-to-access locations and the reduction of installation costs, and they are increasingly seen as essential elements in plant safety solutions. This is a particularly important consideration with gas detection systems, whose operation can be easily impacted by factors such as installation location and ambient conditions. And even after system installation, ongoing efforts to optimize its overall configuration may necessitate occasional changes in the location and number of detection devices. The use of wireless technology eliminates the need to worry about wiring and thus greatly facilitates the process of moving and/or installing additional detection devices.
To achieve SIL2 level risk reduction when using wireless gas detectors with a safety instrumented system, communication protocols that comply with the functional safety requirements specified in the IEC 61508 international standard*4 are required. To meet this need, Yokogawa will provide a SIL2 wireless gas detection system based on a new version of the ProSafe-RS safety instrumented system that will link to field devices using an IEC 61508 compliant communication protocol.
Features of the System
The ProSafe-RS SIL2 wireless gas detection system will consist of a new version of the ProSafe-RS safety instrumented system, R4.03.10, that will be enhanced to add support for an IEC 61508 compliant safety communication technology used in distributed automation; annunciator panels; ISA100 Wireless*5 compliant field wireless devices; and GasSecure GS01 or GS01-EA wireless gas detectors, which are the only devices of this type in the industry that achieve SIL2 risk reduction.
- Total system solution including both consulting and engineering
Through the use of wireless technology, the ProSafe-RS SIL2 wireless gas detection system will allow increased flexibility with the configuration of detection devices, and will be suitable for use as a fire & gas system and emergency shutdown system thanks to its achievement of SIL2 risk reduction. Based on its knowledge of each of this system's components and its expertise in production control, safety instrumentation, and field wireless engineering and consulting, Yokogawa will be able to offer a total system solution that includes customer support.
- Enhanced operating efficiency
On their Yokogawa CENTUM® VP integrated production control system screens, operators will be able to easily monitor the operation of the ProSafe-RS SIL2 wireless gas detection system as well as that of any conventional wired gas detection system. Since the GasSecure GS01 or GS01-EA wireless gas detector uses the same faceplate as a wired gas detector, operators will have no trouble identifying any changes in the detector's status, thus helping to prevent errors that can result from the misinterpretation of information.
- Improved maintenance
With CENTUM VP, operators will have on-screen access to information on the status of all network devices, the charge remaining on the gas detector batteries, and the status of wireless communications, and thus will be able to quickly detect and respond to any abnormality. Thanks to this functionality, more efficient maintenance plans can be drawn up that, for example, will require fewer periodic checks.
Released in February 2005, the ProSafe-RS safety instrumented system helps prevent accidents by detecting abnormal conditions in plant operations and initiating emergency actions such as a plant shutdown. An independent certification body has certified that ProSafe-RS can be used in SIL3 applications. Unlike conventional safety instrumented systems and distributed control systems, which are regarded as having different roles and functions and operate separately, the operation of ProSafe-RS and the CENTUM integrated control system can be fully integrated. ProSafe-RS is highly regarded by users and has been installed in more than 2,100 projects worldwide (as of June 2017).
Yokogawa's Commitment to the Field Wireless Business
Yokogawa developed wireless communication technologies for continuous processes that necessitate advanced control and released the world's first ISA100 Wireless system devices in July 2010, thereby offering its customers a wider range of products to choose from. Currently, Yokogawa offers its customers in the oil, gas, and other industries a wide range of field wireless management stations, field wireless access points, wireless field devices, and wireless adapters for conventional wired devices.
Major Target Markets and Applications
For use in fire and gas systems (FGS) and emergency shutdown systems (ESD) in process industries such as oil, natural gas, petrochemicals, chemicals, pharmaceuticals, electric power, and iron and steel
*1 Established by the International Electrotechnical Commission (IEC), a safety integrity level (SIL) indicates the relative level of risk provided by a safety function. SILs 1 through 4 are defined by IEC 61508. At SIL2, the risk factor for a plant where safety measures are not in place is in a range between 1/100 and 1/1,000. At SIL3, the risk factor is in a range between 1/1,000 and 1/10,000.
*2 A subsidiary of the German company Drägerwerk AG & Co.
*3 Equipped with an extension antenna
*4 A standard for the functional safety of electrical/electronic/programmable safety-related systems
*5 A network protocol based on the ISA100.11a wireless communication standard for industrial automation that was developed by the International Society of Automation (ISA), and the applications necessary for its implementation. This was approved as the IEC 62734 international standard in October 2014.
GasSecure AS is a subsidiary of Dräger and develops, markets, and sells the world's first truly wireless optical gas detector for demanding industrial applications. Representing an evolution in gas detection, the detector is based on innovative ultra-low power MEMS optical technology and has introduced a new level of reliability and flexibility for the detection of gas leaks. The totally wireless detectors increase safety and dramatically reduce costs for the oil & gas, petrochemical, marine, and other process industries. For more information, please visit www.gassecure.com.
Dräger is an international leader in the fields of medical and safety technology. Its products protect, support, and save lives. Founded in 1889, Dräger generated revenues of around EUR 2.43 billion in 2014. The Dräger Group is currently present in more than 190 countries and has about 13,500 employees worldwide. For more information, please visit www.draeger.com.
Yokogawa's global network of 113 companies spans 60 countries. Founded in 1915, the US$3.5 billion company engages in cutting-edge research and innovation. Yokogawa is active in the industrial automation and control (IA), test and measurement, and aviation and other businesses segments. The IA segment plays a vital role in a wide range of industries including oil, chemicals, natural gas, power, iron and steel, pulp and paper, pharmaceuticals, and food. Targeting this segment, Yokogawa helps companies maximize their profits by offering a wide range of highly reliable products and working with the subsidiary KBC Advanced Technologies to provide premium solutions and services. For more information about Yokogawa, please visit www.yokogawa.com.
The names of corporations, organizations, and products herein are either trademarks or registered trademarks of their respective holders.
Yokogawa has a wealth of experience in every part of the oil and gas business, from offshore and onshore facilities to pipelines, terminals, and deepwater operations. We provide solutions that enhance safety, ensure accurate and reliable operation, and increase plant efficiency.
Chemical plants rely on continuous and batch production processes, each posing different requirements for a control system. A continuous process calls for a robust and stable control system that will not fail and cause the shutdown of a production line, whereas the emphasis with a batch process is on having a control system that allows great flexibility in making adjustments to formulas, procedures, and the like. Both kinds of systems need to be managed in available quality history of product, and to be able to execute non-routine operations. With its extensive product portfolio, experienced systems engineers, and global sales and service network, Yokogawa has a solution for every plant process.
In the iron and steel industry, it is crucial to improve the quality of not only products but also manufacturing and operation technologies, as well as to address environmental and energy-efficiency issues. Yokogawa helps customers to create the ideal plant and evolves with them for mutual growth.
The pharmaceutical industry currently faces a major challenge in taking full advantage of the opportunities presented in large emerging markets. Now, more than ever, pharmaceutical companies need to introduce lean manufacturing techniques that will enhance profitability. As one of the world's leading industrial automation suppliers, Yokogawa is committed to delivering the best possible solutions for your best manufacturing practices.
Petrochemical companies’ needs are extremely diverse. To come out ahead in today’s highly competitive marketplace, producers are striving to improve quality and productivity. Yokogawa provides tailor-made solutions for these needs based on its long and wide-ranging experience in this field.
The flexibility of wireless solutions enables less investment in infrastructure while providing greater insights into plant operations.
Safeguard your plant with our industry-leading safety instrumented systems, designed to prevent unnecessary shutdowns, improve asset performance, and enhance operator effectiveness.
ProSafe-RS offers control system integration and features a dual architecture in every module to achieve SIL3-level protection and high reliability.