Yokogawa DTM HART

Designed for 2-wire (loop powered) system configuration. Standard mA (4-20), HART, Profibus, and Foundation Fieldbus communication available.

The EXA ISC202 transmitter is a user programmable instrument for conductivity measurements in medium to highly conductive process liquids, using inductive measuring principles. Standard mA (4-20), HART, Profibus, and Foundation Fieldbus communication available.

Designed for 2-wire (loop powered) system configuration. Standard mA (4-20), HART, Profibus, and Foundation Fieldbus communication available.

This loop-powered analzyer is designed for both ppm and ppb dissolved oxygen measurements, suitable for both Pharmaceutical and Power Generation applications. HART, Foundation Fieldbus, and Profibus versions are available.

The FLEXA™ series analyzers are used for continuous on-line measurements in industrial installations. With an option for single or dual sensor measurement, they are the most flexible two-wire analyzer available.

The PH450 pH and ORP analyzer is a multivariable analyzer that combines pH with temperature and ORP (Redox) measurement, which can be utilized through different output functions: two mA current outputs, four independent SPDT contact outputs and HART. 

Some specifications of this product was discontinued.

The AXF magnetic flow meter is a sophisticated product with outstanding reliability and ease of operation, developed on the basis of decades of field experience. Based on FOUNDATION™ Fieldbus specifications, AXF Fieldbus Magnetic Flow meter models offer more flexible instrumentation.

The ADMAG TI series AXG is ideal for industrial process lines like oil & gas/chemical/pulp & paper/food & beverage/metal & mining applications. With outstanding reliability and ease of operation and maintenance, developed on decades of field-proven experience, the AXG will increase user benefits while reducing total cost of ownership.

The ADMAG AXR is the world's first two-wire magnetic flow meter which employs the fluid noise free "Dual Frequency Excitation Method," achieving excellent stability for instrumentation.

The ADMAG TI series AXW is ideal for general industrial process lines and water supply/sewage applications. The sizes are available from 25 mm to 1800 mm. Besides fluorocarbon PTFE, lining can be selected from various rubber linings.

The AXFA11 magnetic converter has been developed based on Yokogawa's decades long experience in magnetic flowmeters. The AXFA11 continues the tradition of high quality and reliability that has become synonymous with the Yokogawa name and in addition features an even higher level of performance and increased functionality.

Some specifications of this product was discontinued.

The AXFA14 magnetic flow meter remote converter is a sophisticated product with outstanding reliability and ease of operation, developed on the basis of decades of field proven experience.

Yokogawa's vortex flow meters are long-lasting and robust, offering field-proven sensor technology and high reliability to deliver improvements in plant efficiency and reduce OPEX.

Traditional-mount Differential Pressure Transmitter based on the EJA-A Series.

Traditional-mount Differential Pressure Transmitter based on the EJA-E Series.

Differential Pressure Transmitter attached to an IFO assembly based on the EJA-A Series.

Differential Pressure Transmitter attached to an IFO assembly based on the EJA-E Series.

Differential Pressure Transmitter with Remote Diaphragm Seals based on the EJA-A Series.

Differential Pressure Transmitter with Remote Diaphragm Seals based on the EJA-E Series.

Traditional-mount Differential Pressure Transmitter designed for Draft Range applications based on the EJA-A Series.

Traditional-mount Differential Pressure Transmitter designed for Draft Range applications based on the EJA-E Series.

Traditional-mount High-static Differential Pressure Transmitter based on the EJA-A Series.

Traditional-mount High Static Differential Pressure Transmitter based on the EJA-E Series.

Flanged-mounted Differential Pressure Transmitter designed for Liquid-level applications based on the EJA-A Series.

Flange-mounted Differential Pressure Transmitter designed for Liquid-level applications based on the EJA-E series.

Traditional-mount Absolute Pressure Transmitter based on the EJA-A Series.

Traditional-mount Absolute Pressure Transmitter based on the EJA-E Series.

Traditional-mount Gauge Pressure Transmitter based on the EJA-A Series.

Traditional-mount Gauge Pressure Transmitter based on the EJA-E series.

Gauge Pressure Transmitter with Remote Diaphragm Seal based on the EJA-A Series.

Gauge Pressure Transmitter with Remote Diaphragm Seal based on the EJA-E Series.

Traditional-mount High Gauge Pressure Transmitter based on the EJA-A Series.

Traditional-mount High Gauge Pressure Transmitter based on the EJA-E Series.

In-Line Mount Absolute Pressure Transmitter based on the EJA-E Series.

In-Line Mount Gauge Pressure Transmitter based on the EJA-A Series.

In-Line Mount Gauge Pressure Transmitter based on the EJA-E Series.

Yokogawa introduces new release of the Fluidless series – EJAC60E Hygienic Adapter System (Fluidless Type).
This system composes of replaceable adapters(16 adapters in total) with hygienic function of pressure detection.
Suitable for various kind of process including hygienic connection.

Traditional-mount Differential Pressure Transmitter based on the EJX-A Series.

Differential Pressure Transmitter attached to an IFO assembly based on the EJX-A Series.

Differential Pressure Transmitter with Remote Diaphragm Seals based on the EJX-A Series.

Traditional-mount Differential Pressure Transmitter designed for Draft Range applications based on the EJX-A Series.

Traditional-mount High Static Differential Pressure Transmitter based on the EJX-A Series.

Flanged-mounted Differential Pressure Transmitter designed for Liquid-level applications based on the EJX-A Series.

Traditional-mount Absolute Pressure Transmitter based on the EJX-A Series.

Traditional-mount Gauge Pressure Transmitter based on the EJX-A Series.

Gauge Pressure Transmitter with a Remote Diaphragm Seal based on the EJX-A Series.

Traditional-mount High Gauge Pressure Transmitter based on the EJX-A Series.

In-Line Mount Absolute Pressure Transmitter based on the EJX-A Series.

In-Line Gauge Pressure Transmitter based on the EJX-A Series.

High Performance In-Line Mount Absolute Pressure Transmitter based on the EJX-A Series.

In-Line Mount High Performance Gauge Pressure Transmitter based on the EJX-A Series.

This transmitter precisely measures differential pressure, static pressure, and process temperature; then uses these values in a high-perfomance on-board flow computer to deliver fully compensated Mass Flow.

Designed specifically for high static pressure applications, this transmitter precisely measures differential pressure, static pressure, and process temperature; then uses these values in a high-perfomance on-board flow computer to deliver fully compensated Mass Flow.

Digital Remote Sensor (DRS) Transmitter connects two pressure sensors, master (high-pressure side) and slave (low-pressure side) in a remote location, with DRS dedicated communication cable to measure differential pressure.

Direct Mounted Diaphragm Seal System consists of gauge pressure transmitter with single direct mount diaphragm seal.

Diaphragm Seal System consists of differential pressure or gauge pressure transmitter with one or two diaphragm seal.

Direct Mounted Diaphragm Seal System consists of differential pressure transmitter with single direct mount diaphragm seal.

Absolute Pressure Diaphragm Seal System consists of absolute pressure transmitter with single diaphragm seal.

The EXAxt450 series covers all Conductivity Applications including all special software functions in the standard analyzers to reduce the number of configurations. This results in less inventory and less training needs for users that have multiple Conductivity applications.

Yokogawa’s new TDLS™8000 houses all of the industry’s leading features in one robust device. The platform design is for in situ measurements which negate the need for sample extraction and conditioning.

The EXAxt ZR202 transmitter / detector combines benefits of the ZR402 remote analyzer and the ZR22 detector into an intelligent, rebuildable, low-cost measurement device for in-situ humidity measurement.

The FLEXA™ series analyzers are modular-designed analyzers used for continuous online measurements in industrial installations. They offer single or multi-sensor measurement.

The AV550G multi channel oxygen analyzer system allows for measurements on up to 8 ZR22 probes simultaneously.The ZR probe's in-situ measurement method does not require any process conditioning or extractive sampling. This reduces maintenance costs and allows faster measurement response to changes in the process.

Model Name: PH150

316L Stainless Steel Construction
1.6 % accuracy (qG = 50 %)
4 to 20 mA signal output
HART protocol available
Adjustable Limit Switches
0.95 to 550 GPM
0.42 to 1050 SCFM

It is the most technologically advanced mass flowmeter yet. By combining the superior design of the application specific flow sensor and transmitters with the Total Insight philosophy and functionality, the flexibility of the ROTAMASS to adapt to changing  requirements guarantees performance throughout the lifecycle of the process measurement.

ROTAMASS is the integral and remote type Coriolis Mass Flow Meter. Both types have highly refined digital signal processing electronics, so that accurate and stable mass flow measurement is achieved.

Model Name: SC150

The ZR probe's in-situ measurement method does not require any process conditioning or extractive sampling. This reduces maintenance costs and allows faster measurement response to changes in the process.

The YTA110/310/320 series is Yokogawa's base traditional temperature transmitter in the field-mount transmitter line.

The YTA610 is Yokogawa’s essential class temperature transmitter. The dual-compartment structure allows a single or dual input with basic diagnostics on local parameter setting functions.

Like the YTA50, the YTA70 is a 2-wire analog temperature transmitter that outputs a simple 4 to 20 mA output that correspondes to the temperature measured. However, it adds HART 5 (Code -E) or selectable HART 5 or HART 7 (Code -J) digital communication.

The YTA710 is Yokogawa’s ultimate class temperature transmitter. The dual-compartment structure allows a single or dual input with advanced diagnostics on local parameter setting functions.

Yokogawa field instruments include flow meters, pressure and temperature transmitters, and safety measurement instrumentation.

Process analyzers are used to determine the chemical composition or physical properties of substances involved in industrial processes.