YTMX580 Multi-Input Temperature Transmitter

YTMX580 can accept inputs from up to 8 points of measurement such as thermocouples (8 types: K, E, J, etc.) or RTD signals (3 types: Pt100, etc.), converting the corresponding measurement input values to a wireless signal. It can also accept DC voltage, resistance, and 4 to 20 mA DC signal input.1

  • Easy Setup: Field Wireless
    • Cut back on troublesome wiring, reducing setup costs.
    • Traditional wired connections can easily be switched to a wireless solution.
  • ISA100.11a International Wireless Communication Standard2
    • Advanced encryption maintains communication security.
    • Multi-vendor communication supports transmitters from a variety of manufacturers.
  • Reliable, Fast, 8-ch Multipoint Measurements
    • 8 ch universal input: Perfect for multipoint measurement applications.
    • High performance measurements with intervals as fast as 1 sec (3 ch), or 2 sec (8 ch).
    • Superb environmental tolerance:
      Operating temperature of -40 to 85°C
      (-40 to 185°F)3;
      Protection level of IP66/IP67 & NEMA 4X.
  • Explosion protection
    • FM, CSA: Intrinsically safe Approval, non-incendive (Class I) Approval
    • ATEX, IECEx: Intrinsically safe Approval
    • TIIS: Intrinsically safe Approval
  • Easy Battery Maintenance
    • Typical battery life is 6 years (measuring at 60 seconds intervals).
    • Battery packs can be swapped even in hazardous areas.
  • Supporting Plant Wide Field Wireless
    • Full Redundancy(Duplicate, Duocast)
    • 4hops
    • Remote Antenna + Extension cable
  1. Does not support explosion proof standards for 4 to 20 mA DC signal input.
  2. Industrial wireless communication standard from the International Society of Automation (ISA).
  3. TIIS: –20 to 60°C
    FM, CSA, ATEX, IECEx: –50 to 70°C
Wireless specifications Communication protocol ISA100.11a protocol
Frequency 2400 - 2483.5 MHz license free ISM band
Data rate 250 kbps
RF Transmitter power Max. 11.6 dBm (fixed)
Radio security AES 128 bit codified
Antenna +2 dBi Omni directional type
Standard specifications Accuracy Please refer to GS 04R01B01-01EN.
Battery life Generally 6 years under the following conditions1: update time 60 sec, device role I/O functions only, ambient temperature 23°C ±2°C, LED indicator off
Functional specifications Input channels 8 points
Input signal Thermocouples: B,E,J,K,N,R,S,T (IEC584)
RTD: Pt100,Pt200,Pt500 (IEC751) 2-,3-, and 4-wire
DCV2: mV (-10 to 100 mV), V (-0.01 to 1 V)
Ohm: Resistance 2-,3-, and 4-wire (0 to 2000 Ω)
Current2: mA (4 to 20 mA, with external shunt resistors)
Update period 1 sec to 60 min selectable (up to 2 seconds with 4 ch or more)
Power supply Lithium thionyl chloride (size Dx2) battery
Enclosure IP66/IP67, NEMA Type 4X
Operating ambient temperature -40 to 85°C (-40 to 185°F)
Certification/Conformity Explosion protect FM,CSA,ATEX,IECEx,TIIS: Intrinsically safe
FM,CSA: Nonincendive approval
EMC EN61326-1 Class A Table 2 (For use in industrial locations), EN61326-2-3, EN 301 489-1, EN 301 489-17
Regulation Conformity of the Wireless Module • FCC Approval
• IC Approval
• Japanese Radio Law
R&TTE Conformity Standards ETSI EN 300 328, ETSI EN 301 489-1,ETSI EN 301 489-17, EN60950-1, EN62311
Safety Standards EN61010-1, EN61010-2-030
CSA C22.2 No.61010-1-12, CSA C22.2 No.61010-2-030-12
UL 61010-1, UL 61010-2-030 (CSA NRTL/C)
  1. Actual battery life will vary depending on operating temperatures, vibration, and other environmental factors.
  2. Does not support explosion proof standards.

YTMX580 System Configuration Example

YTMX580 Application Examples

  • Temperature monitoring is required to prevent wind-fueled fire hazards.
  • The measuring points are up to 600 meters away from the control room.

Install a YTMX580 on the side of the rotating furnace that can wirelessly transmit measured values from multiple temperature sensors.


Employ the ISA100.11a-compliant YTMX580 Multipoint Wireless Transmitter. The YTMX580 has 8 channels of universal input, which is perfect for multipoint measurement applications, and it can withstand harsh operating temperatures of -40 to 85 °C.

Application Note

A battery room is used to storage batteries for emergency power management in the plant. Each substation has battery room and the storage batteries are lead-acid batteries which must be maintained within specified operating temperature limits. Temperature management is important to ensure a long service life of the batteries especially for the plant in desert climates.


Delayed Coker is a type of coker who's process consists of heating residual oil feed to its thermal cracking temperature in a furnace. The most important variable in industrial furnace control is temperature. Temperature is measured throughout the furnace in different zones and temperature effects the materials being manufactured and therefore must be precisely monitored to prevent deviations in quality of the final product.

Application Note

An induction furnace melts metal by creating very large currents in the material. These currents are induced using three electrodes positioned inside the furnace. The furnace is automated so that once the material has been melted, the electrodes are removed and the furnace then tips the molten metal into a crucible where it can be easily transferred to the production line where it will be cast into ingots. The atmosphere is extremely aggressive and the wired infrastructure is both expensive and very unreliable to maintain. The furnace control requires a total of 20 measurement points distributed around and inside the furnace. The harmonic field effects caused by short circuit 40,000 A (300V). The causes significant interference.


Customer needed efficiency improvement of steel manufacturing by temperature monitoring for heat/cooling equipment. Previous system required periodic compensation lead changing.


The client wanted to monitor the temperature on a chimney. Exhaust air is exposed to the heat on the way traveling from the inlet to the outlet in the chimney. Then constituent of the air transform to harmless elements. It is important to keep the temperature in the chimney as designed.


Direct Reduction Iron (DRI) is one of the processes to reduce oxygen from iron oxide pellets for steel plant. More than 90% of DRI processes use heated LNG as process gas where PID control for temperature or interlock control is of vital importance.


One important risk to manage with regard to coal stacks is preventing fires due to spontaneous combustion.

Yokogawa Technical Report

Since 2010, Yokogawa has been providing wireless products conforming to the ISA100.11a wireless communication standard for industrial automation (IA). As a new addition to the lineup, Yokogawa has developed the YTMX580 multi-input temperature transmitter. Like the YTA510 temperature transmitter, YTMX580 is driven by batteries, but the number of its inputs has been increased from two to eight.

Looking for more information on our people, technology and solutions?

Contact Us