YTMX580最多可接收8點測量輸入值,如熱電偶(8種類型:K、E、J等)或RTD信號(3種類型:Pt100等),並將相應的測量輸入值轉換為無線信號。它也可以接收DC電壓、電阻和4~20 mA DC信號輸入。1
- 輕鬆安裝:現場無線
- 減少複雜的配線,降低安裝成本。
- 傳統的有線連接可以輕鬆切換成無線解決方案。
- ISA100.11a國際無線通信標準2
- 高級加密可以保持通信的安全性。
- 多供應商通信支持不同制造商的變送器。
- 可靠、快速的8通道多點測量
- 8通道通用輸入:多點測量應用的理想選擇。
- 周期最快為1秒(3通道)或2秒(8通道)的高性能測量。
- 卓越的環境耐受性:
運行溫度:-40 to 85°C
(-40 to 185°F)3
保護等級: IP66/IP67 & NEMA 4X。
- 防爆保護
- FM, CSA:本安認證、非易燃(I級)認證
- ATEX, IECEx:本安認證
- TIIS:本安認證(申請中)
- 輕鬆進行電池維護
- 通常電池壽命為6年(測量周期為60秒時)。
- 甚至可以在危險區域更換電池組。
- 支持廠區域現場無線
- 全冗餘(重複、Duocast)
- 4hops
- 遠程天線+延長電纜
- 不支持4~20 mA DC信號輸入的防爆標準。
- 國際自動化協會(ISA)的工業無線通信標準。
- TIIS: –20 to 60°C
FM, CSA, ATEX, IECEx: –50 to 70°C
關於OpreX
OpreX是橫河電機為其工業自動化(IA)和控制業務推出的全新綜合品牌,其代表了橫河相關技術和解決方案的卓越之處。它是由每個類别下不同系列組成,本產品是OpreX現場儀表系列,屬於OpreX測量類别。
Details
無線規格 | 通信協議 | ISA100.11a協議 |
---|---|---|
頻率 | 2400 - 2483.5 MHz免許可證的ISM頻段 | |
通信速率 | 250 kbps | |
RF 變送器功率 | Max. 11.6 dBm (固定) | |
無線電安全性 | AES 128 位 加密 | |
天線 | +2 dBi 全向型 | |
標準規格 | 精度 | 請參閱 GS 04R01B01-01EN. |
電池壽命 | 以下條件下通常為六年1: 更新周期六十秒, 設備僅作為 I/O功能, 環境溫度為23°C ±2°C, LED顯示器關閉。 | |
功能規格 | 輸入通道 | 8點 |
輸入信號 | 熱電偶: B,E,J,K,N,R,S,T (IEC584) RTD: Pt100,Pt200,Pt500 (IEC751) 2-,3-, 和4線 DCV2: mV (-10 to 100 mV), V (-0.01 to 1 V) Ohm: 電阻 2-,3-, 和4線 (0 to 2000 Ω) 電流2: mA (4 to 20 mA, 帶外部分流電阻) | |
更新周期 | 1 秒 ~ 60 分可選 (4通道或以上時最快2秒) | |
電源 | 鋰亞硫酰氯電池 (尺寸 Dx2) | |
外殼保護等級 | IP66/IP67, NEMA Type 4X | |
運行環境溫度 | -40 to 85°C (-40 to 185°F) | |
認證/標準 | 防爆保護 | FM,CSA,ATEX,IECEx,TIIS: 本安 FM,CSA: 非易燃 |
EMC | EN61326-1 A級 表 2 (用於工業區), EN61326-2-3, EN 301 489-1, EN 301 489-17 | |
無線產品符合的標準 | • FCC認證 • IC認證 • 日本無線電法 | |
R&TTE一致性標準 | ETSI EN 300 328, ETSI EN 301 489-1,ETSI EN 301 489-17, EN60950-1, EN62311 | |
安全要求標準 | EN61010-1, EN61010-2-030 CSA C22.2 No.61010-1-12, CSA C22.2 No.61010-2-030-12 UL 61010-1, UL 61010-2-030 (CSA NRTL/C) |
- 實際電池壽命隨運行溫度、振動及其他環境因素的變化而變化。
- 不支持防爆標準。
參考
Wireless Multi-Input Temperature Transmitter YTMX580 can accept inputs from up to 8 points, and contribute to your CAPEX cost reduction.
Install a YTMX580 on the side of the rotating furnace that can wirelessly transmit measured values from multiple temperature sensors.
Caustic soda and hydrochloric acid, produced in electrolyzer plants, are fundamental materials used in varieties of industries; chemicals, pharmaceuticals, petrol-chemicals, pulp and papers, etc. Profit is the result of the effective production with minimized running / maintenance cost. Proper control of the process brings you stabilized quality of products with the vast operational profit.
Delayed Coker is a type of coker who's process consists of heating residual oil feed to its thermal cracking temperature in a furnace. The most important variable in industrial furnace control is temperature. Temperature is measured throughout the furnace in different zones and temperature effects the materials being manufactured and therefore must be precisely monitored to prevent deviations in quality of the final product.
Direct Reduction Iron (DRI) is one of the processes to reduce oxygen from iron oxide pellets for steel plant. More than 90% of DRI processes use heated LNG as process gas where PID control for temperature or interlock control is of vital importance.
One important risk to manage with regard to coal stacks is preventing fires due to spontaneous combustion.
Since 2010, Yokogawa has been providing wireless products conforming to the ISA100.11a wireless communication standard for industrial automation (IA). As a new addition to the lineup, Yokogawa has developed the YTMX580 multi-input temperature transmitter. Like the YTA510 temperature transmitter, YTMX580 is driven by batteries, but the number of its inputs has been increased from two to eight.
Wiring temperature sensors installed in a chimney back to a control room can be challenging and expensive, so many plants and facilities are instead implementing wireless solutions, such as this Yokogawa YTMX580 8-input temperature transmitter.
下載
產品型錄
- Field Wireless Product Profile (479 KB)
- 離子膜電解裝定應用儀表及解決方案 (2.9 MB)
- Yokogawa Field Wireless Solution (3.4 MB)
產品外型圖
想了解更多技術&解決方案嗎?
聯絡我們