警報超載是製造工廠中普遍存在的一個問題。由於以往相互獨立的系統逐步整合,操作人員減少,每個操作人員監控的區域範圍相應隨之擴大,需要處理的警報也隨之增多。由於缺乏嚴格的警報合理化措施,警報氾濫的問題越來越嚴重,工廠面臨不斷增加的安全與環境事故風險。
雖然使用者可以通過EEMUA #191和ISA 18.2等標準減少警報,但是仍比較缺乏可利用的實用工具。根據將自下而上解決方案與基礎的自上而下改進方案相結合的概念,橫河電機提出了一種智慧警報管理方法,幫助使用者實現安全、靈活的工廠運行。
橫河電機建議在工廠中面臨警報氾濫情況的使用者引進HIS的CAMS。對於尋求比現有DCS警報系統更強大的警報管理能力的客戶,也將成為HIS的CAMS的受益者。對於計畫將控制室進行整合以及設計符合ISA 18.2標準的警報系統使用者,同樣是該產品的實用和快捷解決方案的受益者。
-
警報報表及分析(Exaquantum/ARA)
工廠操作員經常面臨大量的警報和異常情況,無法快速回應來避免安全相關事件、環境問題、停俥和設備損壞。應用不當的警報管理策略會造成過多的警報和事件,也可能導致操作員由於接收過多資訊而經常忽視這些警報。
-
警報主要資料庫(Exaquantum/AMD)
Exaquantum/AMD(以下簡稱“AMD”)是橫河電機的警報主要資料庫解決方案。支援ANSI/ISA-18.2-2009和EEMUA 191標準,AMD協助管理員和監督人員監視、評估和審計警報設定點的動作,並作為警報檔和合理化程式的一部分。
-
事件序列記錄(Exaquantum/SER)
Exaquantum/SER是事件的報表整合系統,從工廠監控系統中收集警報和事件資訊及點數據,儲存單獨的資料庫中進行分析。
-
警報分析(Exaplog)
新的Exaplog事件分析套裝軟體有助於定量分析DCS事件日誌中的問題。交替分析警報設定調整和操作序列調整,您可以不斷提高生產效率。
-
動態警報管理(AAASuite)
使用簡化警報的程式將警報氾濫的問題最小化,高階警報管理器可以查看和最佳化警報及提升警報回應。
Details
服務說明 | 橫河電機的交付物 |
警報和事件分析 | ✓ 警報當前狀態的報表 |
警報理念 | ✓ 符合ISA 18.2標準的警報理念文檔 |
減少基本的無效警報 | ✓ 工廠中無效警報的報表 |
基於ISA 18.2/EEMUA#191的警報系統設計 | ✓ 當前警報狀態以及設計與標準的差異報表 |
基於ISA 18.2/EEMUA#191的警報系統設計 | ✓ Exaquantum\AMD的安裝、調試和培訓,創建警報主機設計資料庫。 |
基於運行狀態進行警報管理 | ✓ 警報設定點當前狀態的報表,顯示工廠中各種運行狀態。 |
基於運行狀態進行警報管理 | ✓ AAASuite/Exapilot的安裝、調試和培訓,進行動態警報管理。 |
警報監視和即興操作 | ✓ 警報當前狀態的報表 |
警報監視和即興操作 | ✓ Exaquantum\ARA的安裝、調試和培訓,用於警報監視和報表。 |
參考
Alarm management is not just a project that has a start and end date; it's a continuous cycle. Once the alarm system has been reviewed and improvements have been identified, we must check that controls are in place to ensure the alarm system remains functional. The key is to ensure that the system is continuously monitored and any changes are fully documented. There are seven key steps for alarm management. Rationalization is one of those critical steps.
Summarizing the standard's 10 stages into four general tasks can simplify implementation and speed up the schedule.
Modern historians do much more than just store process data. They also provide analysis, reports, and valuable operational and business information.
March 2007
A widespread issue in manufacturing plants is alarm overload. As formerly independent systems are integrated for more effective operation by fewer operators, each operator has to monitor an increasingly wider area and consequently deal with more alarms.
March 2007
Alarm rationalisation and management is vital if plant operators are not to be overwhelmed by a rapid proliferation of alarm systems. A widespread issue in manufacturing plants is alarm overload. As formerly independent systems are integrated for more effective operation by fewer operators, each operator has to monitor an increasingly wider area and consequently deal with more alarms.
下載
影片
President & CEO of Yokogawa Electric Corporation of Japan, Shu Kaihori, discusses optimizing plant performance with Andy Chatha, President & CEO of ARC Advisory Group.
想了解更多技術&解決方案嗎?
聯絡我們