|
- High-speed data acquisition (up to 10 ms/24 ch, 100 to 200 ms standard) on 20 units (up to 1200 ch)
- Supports everything from multi-interval (three scan intervals) temperature measurement to high-speed applications
- Edit up to four arbitrary output patterns with data output and logging on a single unit
|
| - |
Computation channels to support multichannel applications of up to 240 ch
|
| - |
Embed backed-up data from a CF card into data files
|
| - |
Automatically transfer data files via e-mail and FTP upon occurrence of events
|
| - |
Convenient all-channel display for waveform monitoring lets you spot abnormal channels at a glance
|
| - |
Transfer data to Excel in real time with the DDE function
|
| - |
Automatically convert created data files to Excel, Lotus, or ASCII
|
| - |
Overwrites old files for efficient use of hard disk space
|
| - |
Saving display layouts lets you monitor using the desired screens each time
|
| - |
Output patterns can be assigned to transmission output channels
|
|
This software comprises six menu options-Monitor Window, Detailed Display Setup, Channel Setup, Acquisition Conditions, System setup, and Link/Delink.
|
|
A real-time monitor for measured data. You can view both waveforms and digital data.
|
|
Use this menu option to specify display parameters for data (waveform color, etc.) shown in the monitor window.
|
|
Use this menu option to individually configure input channels (ranges, etc.) or define computation channels (e.g., inputting computational expressions).
|
|
|
|
Waveform editing screen
for analog PWM output
|
|
|
-Drag & drp editing of output waveform patterns
-Edit up to 4 pattern waveforms
-Synched or unsynched waveform output
|
|
Use this menu option to set various conditions related to file acquisition (e.g., measurement interval, interval of data saving, start/end of measurement, and file name designation).
|
|
Use this menu option to define, for example, module configuration. This module configuration is illustrated in an easily understood manner.
|
|
This menu command automatically recognizes hard-wired MX100 units. Once configured, this command retains the link information.
|
|
Redisplays saved data. With this software, you can call up waveform displays, digital displays and cursor-driven displays, and perform interval computation.
|
|
|
|
|
DAQOPC/DAQOPC for Darwin are communication interface packages that comply with the OPC standard.
|
|
|
|
|
|
