Fieldbus Device Description (DD) and Capabilities File (CF)

ADMAG AE is the Advanced Engineering designed magnetic flowmeter, evolved from the field proven ADMAG series. ADMAG AE has a dual compartment housing providing ease of wiring while isolating the electronics from the environment. ADMAG AE continues the use of dual frequency excitation, which provides quick response and noise free output. ADMAG AE excitation method and a ceramic lining allow this magnetic flowmeter to be applied to an even greater range of applications.

The AXF magnetic flow meter is a sophisticated product with outstanding reliability and ease of operation, developed on the basis of decades of field experience. Based on FOUNDATION™ fieldbus specifications, AXF Fieldbus Magnetic Flow meter models offer more flexible instrumentation.

The AXFA11 magnetic converter has been developed based on Yokogawa's decades long experience in magnetic flowmeters. The AXFA11 continues the tradition of high quality and reliability that has become synonymous with the Yokogawa name and in addition features an even higher level of performance and increased functionality.

The AXFA14 magnetic flow meter remote converter is a sophisticated product with outstanding reliability and ease of operation, developed on the basis of decades of field proven experience.

• The classic vortex flow meter
• Accurate, stable measurements
• Wide variety of applications

Maximize performance and profitability

Differential Pressure Transmitter attached to an IFO assembly based on the EJA-A Series.

Differential Pressure Transmitter with Remote Diaphragm Seals based on the EJA-A Series.

Traditional-mount Absolute Pressure Transmitter based on the EJA-A Series.

Traditional-mount Gauge Pressure Transmitter based on the EJA-A Series.

Gauge Pressure Transmitter with Remote Diaphragm Seal based on the EJA-A Series.

Traditional-mount High Gauge Pressure Transmitter based on the EJA-A Series.

In-Line Mount Gauge Pressure Transmitter based on the EJA-A Series.

The FVX110 field mount indicator is fully compliant with the FOUNDATION™ fieldbus digital communications protocol. With a single FVX110, up to 16 process variables from multiple field instruments can be monitored, helping our customers reduce their plant instrumentation costs.

The solution for high process temperature and cryogenic applications.

Achieve stable measurement and quick response times.

• digitalYEWFLOW multivariable type vortex flow meter
• Shedder bar with embedded temperature sensor
• Monitors temperature, calculates mass flow rate

• ROTAMASS Coriolis Mass Flow Meter, integral and remote type
• Highly refined digital signal processing electronics for accurate, stable mass flow measurement 

The YTA110/310/320 series is Yokogawa's base traditional temperature transmitter in the field-mount transmitter line.
HART and Fieldbus protocol models have been discontinued.

The high performance temperature transmitter YTA510 accepts Thermocouple, RTD, ohms or DC mill volt inputs. The transmitters transmit not only process variables but also the setting parameters using wireless signal. The transmitters run on internal batteries, and the installation cost can be decreased since hard-wiring is not required. The communication is based on ISA100.11a protocol specifications. 

The YVP110 Advanced Valve Positioner accepts digital communication to control a pneumatic actuator mounted to a control valve. It communicates using the FOUNDATION™ fieldbus protocol.