SMART 920 Configuration Software for GM70SM

Description
Wireless Input Unit Configurator is a software application for configuring and performing maintenance on the GX70SM.
Input configuration, wireless configuration, input calibration, and firmware updating are possible by connecting to the GX70SM through USB.

Logging data stored in the GX70SM can be retrieved and saved as a file in the PC. When the GX/GP/GM fails to acquire GX70SM measurement data because the communication between the GX70SM and GX/GP/GM is disconnected or because of some other reason, a logging data file can be used to interpolate the data during which acquisition failed.
Applicable Model

GX70SM

Supporting Operating System
  • Windows 7 Home Premium / Professional SP1 (32-bit edition and 64-bit edition)
  • Windows 10 Home / Pro (32-bit edition and 64-bit edition)
Install Procedure
  1. Double-click the downloaded file to extract the files.
  2. In the extracted folder, right-click InstallE.exe, and click Run as administrator.
  3. The installation wizard starts. Continue to follow the instructions on the screen to install the software.
  4. When the installation is complete, click Finish.
    SMARTDAC+STANDARD > Wireless Input Unit Configure will be registered under All Programs in the Windows Start menu.
Other operating conditions
In order to run this software, some runtime and drivers must be installed on the PC.
If software startup and connection with the wireless input unit are not successful, check the following. 
 
  • When a warning about .NET Framework is displayed on software startup. 
    Microsoft .NET Framework 4.6.1 or higher is required.
    Download from the Microsoft website, and install.
  • When a warning about mfc100.dll is displayed on software startup.
    Microsoft Visual C++ 2010 Redistributable Package (x86) is required.
    Download from the Microsoft website and install.
  • When connecting the USB cable to the wireless input unit after activating the software. 
    USB driver is required.
    Refer to the wireless input unit user's manual for the driver installation procedure.

Related Products & Solutions

GX70SM Wireless Input Unit for SMART 920

The GX70SM wireless input unit is a compact, battery-powered, analog input module that uses 920 MHz radio links to connect to a SMARTDAC+ GX20, GP20, or GM10. These can collect a variety of data points from locations that cannot be easily reached or are difficult & expensive to access.

SMART 920

The SMART 920 allows you to collect data from your entire site without the high cost of wiring points to remote or unpowered locations.

Top