Dissolved Oxygen Measurement in Continuous Aeration Sewage Treatment

Introduction

When used to measure the dissolved oxygen in an aeration tank, sensors tend to quickly become contaminated and need frequent cleaning. A cost-effective solution to this problem has finally been found with the development of the Yokogawa FLXA402 Dissolved Oxygen Converter system. With this system, the sensor is mounted in a float ball holder that protects it from contamination and enables continuous maintenance-free use for extended periods.

 

Expected Benefits

  • Continuously and stably measures dissolved oxygen concentration
  • Reduces operating costs
  • Eliminates the need for manual cleaning

 

Process Overview

Sewage that flows into a treatment plant is sent to a primary sedimentation tank to remove the garbage and sludge. Thereafter, it is routed to an aeration tank where activated sludge (sludge containing bacteria, protozoa, and other microorganisms) is added and air is blown into the mixture to agitate it.
The microorganisms in the activated sludge thrive on the oxygen and cause the organic substances in the sludge to proliferate and the generated solids to be precipitated.
A shortage of dissolved oxygen (DO) will kill the microorganisms, so the DO concentration in the aeration tank must be properly controlled. A DO analyzer is used to continuously measure the DO concentration.

Sewerage treatment procedure
Sewerage treatment procedure

The spherical float stays relatively clean because contaminants are washed off by the surface-level flow of water. The sensor diaphragm is kept relatively free of contamination as it is positioned at the same height as the top portion of the float.

PB350G/DO30G""

 

Solution Details

Measurement System

  • Detector: DO30G-NN-50-□□/PN
  • Float holders:
    Angled type: PB350G-PV-25-NN
    Vertical type: PB360G-PV-□5-NN
  • Converter: FLXA402-A-B-□□-D1-NN-A2-WR
  • Terminal box (as needed): WTB10-DO3-NN- □□/□
    With the WTB10 terminal box, the sensors and the converter can be up to 50 meters apart.

Utilities

  • Power supply:
    100 V AC ±15 %, 50/60 Hz
    115 VAC ± 15 %, 50/60 Hz
    230 VAC ± 15 %, 50/60 Hz
  • Power consumption: max. 10 VA

Precautions

  • The measuring point must be at a location where air bubbles are not a frequent occurrence.
  • To prevent the sensor diaphragm from being damaged by solids in the sample liquid, the arm of an angled float holder should be pointed in the downstream direction.

 

Field Data

No effects of contamination after four months of continuous operation

We conducted a test with two DO30G sensors that were equipped with the PB350G Float Ball Holder. During the test, no maintenance was performed on one of the DO30G sensors, while the other DO30G sensor was cleaned every two weeks and calibrated monthly. Over the entire duration of the test, the DO30G sensor that did not receive cleaning showed minimal contamination. Furthermore, its measurements did not deviate appreciably from those of the sensor that was regularly maintained.

DO readings after four months of continuous operation

Отрасли

  • Вода и сточные воды

    Водные ресурсы истощимы, поэтому содействие устойчивому водному циклу является одной из Целей устойчивого развития (SDG). Компания Yokogawa предоставляет передовые решения в области цифрового управления для стабильной подачи чистой и безопасной воды, очистки сточных вод с целью защиты водной среды, управления потерями воды и оптимизации работы установок с целью сокращения выбросов CO2 и снижения эксплуатационных расходов. Используя наши передовые технологии, надёжные продукты, обширные знания и опыт реализации различных проектов в сфере использования водных ресурсов, мы работаем с Вами, чтобы предоставлять устойчивые решения в сфере водных ресурсов, которые способствуют развитию Вашего бизнеса и повышают ценность на протяжении всего жизненного цикла оборудования.

    Компания Yokogawa поддерживает широкий спектр областей применения наших решений по обеспечению необходимого водного режима для рынков городского и промышленного потребления воды.

      

     

    Узнать больше
  • Водоподготовка

    Yokogawa предлагает оптимальные решения для повышения надежности работы водоочистных сооружений. Эти решения включают в себя сложные технологии, непревзойденное качество продукции и обширные ноу-хау применения на протяжении всего жизненного цикла.

    Узнать больше
  • Очистка сточных вод

    Очистные сооружения включают в себя множество единиц оборудования, таких как моторы, насосы и воздуходувки, что делает важным снижение потребления электроэнергии и экономию эксплуатационных расходов. Yokogawa предлагает оптимальные решения для управления с помощью цифровых технологий для повышения энергоэффективности.

     

    Узнать больше

Related Products & Solutions

  • Measuring Sensor DO30G

    The DO30G sensor for dissolved oxygen is designed for use in water treatment plants such as sewage treatment works, effluent activated sludge process, and potable water treatment. It is also effective in river monitoring, intake protection, fish farming, and other fields where water quality is important.

    Узнать больше
  • Сенсоры растворённого кислорода

    Электроды и сенсоры растворённого кислорода (DO) выполняют функцию чувствительных элементов при выполнении измерения концентрации растворённого кислорода. Существует три технологии выполнения таких измерений: полярографическая, гальваническая и оптическая. Различные варианты монтажа чувствительных элементов включают использование шарового поплавка, выдвижного, проточного, погружного держателя, а также прямую врезку.

    Узнать больше

Наверх