Yokogawa offers the dual-input YTA510 and the multi-point YMTX580 temperature transmitters.
All Yokogawa ISA100 compliant products can integrate into any ISA100 compliant network.
YTA510 Wireless Temperature Transmitter
The high performance temperature transmitter YTA510 accepts Thermocouple, RTD, ohms or DC mill volt inputs. The transmitters transmit not only process variables but also the setting parameters using wireless signal. The transmitters run on internal batteries, and the installation cost can be decreased since hard-wiring is not required. The communication is based on ISA100.11a protocol specifications.
YTMX580 Multi-Input Temperature Transmitter
YTMX580 can accept inputs from up to 8 points of measurement such as thermocouples (8 types: K, E, J, etc.) or RTD signals (3 types: Pt100, etc.), converting the corresponding measurement input values to a wireless signal. It can also accept DC voltage, resistance, and 4 to 20 mA DC signal input.
Eliminating the wire using wireless transmitter is the perfect solution for rotating equipment. It establishes data collection between the transmitter and the gateway by reliable communication even though the dryer was rotating.
Wiring temperature sensors installed in a chimney back to a control room can be challenging and expensive, so many plants and facilities are instead implementing wireless solutions, such as this Yokogawa YTMX580 8-input temperature transmitter.
- YTA510 Temperature Transmitter (1.1 MB)
- YTMX580 Multi-Input Temperature Transmitter (3.0 MB)
- Field Wireless System Overview (1.9 MB)
Looking for more information on our people, technology and solutions?Contact Us