US1000 Digital Indicating Controller (DISCONTINUED)

72×144×100 mm sized Digital Indicating Controller has clear bar graph display for PV, SV and MV. It comes with powerful 14 control modes, including optional Custom Computation and dual loop control. The universal input, auto-tuning, "SUPER" functions are standard. Position proportional control and RS485 communication are optionally available.

Overview:

Hot rocks and water come together in select areas to produce renewable energy. CX2000s networked to US/UP controllers provide primary control with distributed backup control for steam turbines.

Application Note
Overview:

Many industrial plants have embedded the PID controls for flow, temperature, pressure, level, etc. in PLC's on the plant floor. In the event of a PLC failure, the control to these critical loops may be lost. The US1000-11 may be configured to act as an automatic backup station and operator interface if PLC service has failed.

Overview:

The US1000-11 Dual Loop Digital Indicating Controller can easily be implemented as a three element boiler drum level/feed water controller. Steam drum level control is necessary to add makeup water as steam is delivered into the header pipe. The level measurement and feed water flow input are the process variables (PV) for a cascade control strategy.

Industries:
Overview:

Chemical addition to a flowing liquid stream is an excellent control application for the US1000-00 Digital Loop Controller. In both water and waste water treatment, chlorine is added as a disinfectant. A residual chlorine analyzer provides the process variable to a closed loop PID controller.

Industries:
Overview:

The US1000-11 Digital Indicating Controller can be programmed to provide two functions, as a heat exchanger temperature controller and a BTU calculator. Why perform both functions? The temperature control is used to maintain a constant product temperature on the discharge side of the heat exchanger.

Overview:

Yokogawa's US1000-11 Digital Indicating Controller is the newest member of the Measurement & Control Division family of industrial and process controllers. One application that can easily be implemented is a reactor cascade control, using product and steam jacket temperatures as the process variables (PV's).

Yokogawa Technical Report
Overview:

A long time has passed since the word "downsizing" was first coined. In the field of instrumentation, total cost reduction is continually being sought, with this trend becoming even more accelerated as a result of the present economic recession.

Looking for more information on our people, technology and solutions?


Contact Us
Top