The DTSX1 addresses the need for maintenance to avoid accidents caused by high-temperature heat, such as equipment failures due to heat and equipment abnormalities. This product focuses on fire detection *1 applications and is also pursuing ease of introduction. Since the fiber optic sensor cable is prepared as a standard product, it is seemingly trivial, but there is no need to worry about unexpected equipment selection.
*1: Fire detection standard (EN 54-22) certificated
VdS-approval No. G 220001
Refer to the General Specifications for detailed specifications.
|Measurement distance range||2km, 4km, 6km, 8km, 10km, 16km|
|Number of channels||1, 2, 4|
|Sampling resolution||Measuring temperature at 1-meter intervals|
|Minimum temperature measurement time||5 sec|
|Relay output||8 / 64 ports, max. 35 V / 1 A DC|
|Relay input||4 ports, 12 to 30 V / 5 mA DC|
|Power supply voltage||10 to 30 V DC|
|Power consumption||30 W（ normally 15 W at an ambient temperature of 23 °C ）|
|External dimensions||500 (W) x 500 (H) x 250 (D) mm (Note)|
Note: External dimensions exclude protrusions (for details, see the external dimensions drawing)
· Fire detection standard (EN 54-22) certificated up to 10 km range with the standard type cable.
The latest software that enables you to build a DAQ system without programming. Designed for maximum compatibility with Yokogawa recorders, data loggers, temperature controllers, and power monitors, GA10 can also acquire data via Modbus communications.
Temperature Monitoring Solution for
Quick Detection of Fires in Fume Ducts
Reactor/Furnace Wall Healthiness Monitoring with a Fiber Optical Temperature Sensor
Temperature Monitoring Solution forMaximum VSD Operating Efficiency
Looking for more information on our people, technology and solutions?