單回路控制器

單回路控制器用於多種工業設施,例如發電廠、煉油廠、石化廠、化工廠和鋼鐵廠。這些控制器從傳感器接收溫度、流量、壓力和其他類型的測量讀數,並向閥門等控制元件發送相應指令,以便將這些值保持在期望範圍內。每個控制回路都有單獨的控制器。如今,單回路控制器廣泛應用於工業領域,用於控制小型工廠設施並用作集散控制系統的備用設備。

  • YS1700可編程指示調節器可以通製運行用戶程序為各種應用進行定制,並通製橫河電機的專有技術、用戶友好性和可擴展性提高可靠性。

  • YS1500指示控制器具有PID控制所需的基本控制功能。可以根據用戶用途選擇所需功能。

  • YS1350是一款手動設定裝定,可以手動輸出設定訊號至控制器等設備。YS1360是一款手動設定裝定,可以手動輸出操作訊號至操作終端。

  • 帶報警的YS1310指示器是一款輸入指示器,可以使用兩個輸入進行報警。可同時顯示2個回路。兩個輸入均可以生成上限報警、下限報警、上上限報警和下下限報警,並且可以從總共6個接點輸出任意報警的AND連接或OR連接。

  • 如果YS1360、YS136、YS1500、YS150、YS1700或YS170儀表故障,YS110備用手動站可以代替儀表將4~20 mA訊號輸出至控制閥執行器。

  • YSS1000設定軟件(以下簡稱YSS1000)是用於配定YS1000系列(以下簡稱YS1000)設備功能的軟件包。

  • 7款R機型具有可完全互換的I/O規格、終端陣列和形狀。隻需更換內部儀表即可將這些機型更換為最新設備,保持接線完好無損。

  • YS80系列輔助單元有6種不同種類。了解更多關於這些單元的訊息。

摘要:

Thomson provides a wide range of video technologies, fi nished products and services to consumers and professionals in the entertainment and media industries. In 2002, the company had sales of 10.2 billion Euros (US$9.6 billion). Thomson distributes its products and services under the Technicolor, Glass Valley, RCA and Thomson brand names.

摘要:

Continuous technology improvement is ongoing in the pulp & paper industry to obtain the best possible performance. The improved plant performance translates to the higher quality improvement and lower cost, and simultaneously environmental friendly plant operation.

產業別:
摘要:

Automated control of industrial boilers is an excellent application for YS1700 microprocessor-based loop controllers. These instruments can be programmed to perform the operations of plant master, boiler master, fuel and air control with oxygen trim and drum level/feedwater control.

摘要:

In process control it is not uncommon for systems to be affected by dead times, due to material transfer times. This is evident typically in pipelines. A fluid of density ρ and flow rate w in a section of pipe A the length of d takes the amount of time τ = ρAd/w to cover the whole distance (see Figure 1).

產品簡介

    摘要:

    The YSS1000 setting software (hereinafter referred to as the YSS1000) is package software to configure the functions of the YS1000 series (hereinafter referred to as the YS1000) devices. Writing and reading of parameters and user programs of the YS1000, and PID tuning and monitoring of user programs can be performed through the use of communication.

想了解更多技術&解決方案嗎?


聯絡我們
置頂