Unable to find the SMARTDAC+ GM on the IP address setting software

Even if the PC has multiple network ports (LAN, Wi-Fi, etc.), the IP address setting software can only find 1 of them. Disable all ports except for the one the GM is connected to (turn the LAN card and Wi-Fi OFF), and then perform the search again.

Related Products & Solutions

  • Modular GM10

    SMARTDAC+TM GM10 data logger has a modular architecture that can acquire necessary data. By supporting not only I/O but also many communication protocols such as 920MHz wireless, Modbus and so on. Monitor and setting changes are available through Bluetooth. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

    See More