Why aren't trends and other monitors displayed with SMARTDAC+ GX/GP/GM series?

The web application uses Java to display trends and other monitors.
Trends and other monitors cannot be displayed correctly in some network environments (see the figure below), but this can be corrected by changing the settings shown below. Note that this is a non-standard configuration, please proceed at your own risk.

Error Message

《Changes to settings》
Control Panel > Java > General tab > Network Settings > Direct connection

Java Control Panel Image

Network Settings

Related Products & Solutions

Modular GM10

SMARTDAC+TM GM10 data logger has a modular architecture that can acquire necessary data. By supporting not only I/O but also many communication protocols such as 920MHz wireless, Modbus and so on. Monitor and setting changes are available through Bluetooth.
Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

Touch Screen GP10/GP20

The SMARTDAC+TM GP10/GP20 is a portable paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices.
Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

Touch Screen GX10/GX20

The SMARTDAC+TM GX10/GX20 is a panel mount paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices.
Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

Top