Global   
If the DA7 does not use a transmitter power supply, the input signal is wired between the C-B terminals. Can I use HART communication in this case?
  • Home
  • Library
  • Resources
  • FAQs
  • If the DA7 does not use a transmitter power supply, the input signal is wired between the C-B terminals. Can I use HART communication in this case?

If the DA7 does not use a transmitter power supply, the input signal is wired between the C-B terminals. Can I use HART communication in this case?

For HART communication on the DA7, you can either connect between the C-B terminals (when not using the transmitter power supply) or between the A-C terminals (when using the transmitter power supply).

Related Products & Solutions

  • JUXTA D Series Signal Conditioners

    The D Series is DCS-supported signal conditioners, consisting of modular type signal converters with versatile I/O specifications and housing nest. JIS and EIA conformed mounting nests come with terminal blocks for field wiring, connectors for DCS connection, and connectors for communications.

Top