The CF cards of the following manufacturers have been verified for use with the DAQSTATION, MV, and DAQMASTER series. However, please note that Yokogawa does not guarantee normal operation of the CF card when using with products listed below.
DAQSTATION/MV Series
Applicable Models: DX100, DX200, DX100P, DX200P, DX100L, DX1000, DX1000N, DX2000, CX1000, CX2000, MV100, MV200, MV1000, MV2000
Manufacturer |
Product Name |
Capacity |
Manufacturer Model |
| SanDisk |
SanDisk Extreme® III CompactFlash® |
1 GB |
SDCFX3-1024-903 |
| SanDisk |
SanDisk Extreme® III CompactFlash® |
2 GB |
SDCFX3-2048-903 |
| SanDisk |
SanDisk Extreme® IV CompactFlash® |
2 GB |
SDCFX4-2048-903 |
DAQMASTER Series
Applicable Models: MX100, MW100
Manufacturer |
Product Name |
Capacity |
Manufacturer Model |
| SanDisk |
SanDisk Ultra® II CompactFlash® |
1 GB |
SDCFH-1024-903 |
| SanDisk |
SanDisk Ultra® II CompactFlash® |
2 GB |
SDCFH-2048-903 |
| SanDisk |
SanDisk Extreme® III CompactFlash® |
1 GB |
SDCFX3-1024-903 |
| SanDisk |
SanDisk Extreme® III CompactFlash® |
2 GB |
SDCFX3-2048-903 |
Precautions When Using the CF Card
In rare cases, the CF card is not recognized or generates an error when inserted into the instrument. If this occurrs, try the following.
- Eject the CF card, then reinsert it.
- Replace with a CF card that you know to be working normally.
- Format the CF card on the DAQSTATION or DAQMASTER (all data on the card will be deleted).
Please direct inquiries regarding the other manufacturers' verified CF cards above to their manufacturers.
Please note that sales of the above-mentioned CF card may be discontinued from the manufacturer without prior notice.
