This software is designed for Confocal Quantitative Image Cytometer CQ1.
CQ1 Software can be installed in PC other than CQ1 control workstation and customer can view/analyze data measured by CQ1 (CQ1 Offline Software). Software performance is guaranteed only if CQ1 Software is installed in PC designated by Yokogawa. CQ1 Software can be used by customer own PC but performance is not guaranteed. Minimum system requirements are as following. Because of RAM capacity, analysis function may not work by 32 bit OS PC. In case of using analysis function in offline PC, it is recommended using 64 bit OS PC of following specification.
|OS||64bit OS (Windows 7/10 Japanese/English)||32bit OS (Windows 7/10 Japanese/English)|
|Processor||3.60 GHz||3.40 GHz|
|HDD (Built-in)||System drive(C:) 2TB, Data drive(D:) 3TB||System drive(C:) 2TB, Data drive(D:) 3TB|
|Display||1920 x 1200 and over*|
*Do not change the resolution of display when using CQ1 Software.
To use CQ1 software, the activation code is required.
After unzipping a zip file and installing the software, the MID will be displayed. Fill in the request sheet and send to us by e-mail.
|Install manual : IM80J01A03-01E_006.pdf（1MB）||Download|
The CQ1 provides the highest quality confocal images and extended live cell imaging in a space-saving benchtop design.
Our high-content analysis (HCA) systems utilize powerful software to address a wide range of research applications from basic science to complex compound screening.
Yokogawa’s high content analysis systems and dual spinning disk confocal technologies provide high-speed and high-resolution live cell imaging, enabling leading-edge research around the world.