Scott Series Signal Conditioners
Specifications
Common Specifications
| Construction | Nest-mounting type |
|---|---|
| Mounting Method: | Rack mounting |
| Connection Method: | M4 screw terminal |
| External Dimensions: | 148×27×244 mm (H×W×D) (including sokets) |
| Power Requirements: | 20 to 130 V DC, 80 to 138 V AC AC/DC use |
Signal Conditioners
| Model | Product Name | Input Type | Output Type | Descriptions |
|---|---|---|---|---|
| GD5 | Tachometer Transmitter | Signal from tacho-generator | DC current or voltage signal | |
| GM1 | mV Transmitter | DC mV DC input | DC current or voltage signal | |
| HC0 | Output Isolator | 4 to 20 mA DC | 4 to 20 mA DC | |
| HF0 | E/P Transducer (2 Inputs/2 Outputs) | 1 to 5 V DC or 4 to 20 mA DC (with selecting switch) | 20 to 100 kPa | |
| HP1 | Pulse Repeater | 2-wire: Contact ON/OFF or voltage pulse power distributor built into card 3-wire: Power distributor built into card |
Transistor ON/OFF (Open collector) |
