I purchased a UT with the communication function, but currently I'm not using the communication function. I haven't even wired communication, but the blinking SP decimal point of a communication error appears. Why is that?

Check the operation mode and communication protocol.
If the operation mode is Remote (REM lights) and it's set to coordinated (PSL=CO-S), an error will occur if there is no wiring.

相关产品&解决方案

  • UT32A-D

    UT32A-D是一款紧凑型数字指示控制器,带可选的2回路控制,还包括梯形图顺控功能。

    更多
  • UT35A/UT32A

    UT35AUT32A温度控制器采用易读的14段大型彩色LCD显示屏,并配以导航键,从而极大地提升了监视和操作性能。标配梯形图顺控功能。控制器安装深度较短,有助于节省仪表面板的空间。UT35A/UT32A还支持以太网通信等开放网络。

    更多
  • UT75A高级应用

    UT75A温度控制器采用易读的14段大型彩色LCD显示屏,并配以导航键,从而极大地提升了监视和操作性能。标配梯形图顺控功能。控制器安装深度较短,有助于节省仪表面板的空间。UT75A还支持以太网通信等开放网络。

    更多
  • 中级UT55A/UT52A

    UT55AUT52A温度控制器采用易读的14段大型彩色LCD显示屏,并配以导航键,从而极大地提升了监视和操作性能。标配梯形图顺控功能。控制器安装深度较短,有助于节省仪表面板的空间。UT55A/UT52A还支持以太网通信等开放网络。

    更多

置顶
WeChat QR Code
横河电机(中国)有限公司