When writing SMARTDAC+ GX/GP/GM I/O channel data to an SLMP server using SLMP communications, how should I set the first and last channels?

When writing I/O channel data using SLMP communications, specify channels within the same module for the first and last channels of the SLMP communication command. When writing data from multiple modules, use different command numbers for each module.

Example To write 30 ch of data from CH0001–CH0210,
   Command no. 1: CH0001–CH0010
   Command no. 2: CH0101–CH0110
   Command no. 3: CH0201–CH0210

Related Products & Solutions

Modular GM10

SMARTDAC+TM GM10 data logger has a modular architecture that can acquire necessary data. By supporting not only I/O but also many communication protocols such as 920MHz wireless, Modbus and so on. Monitor and setting changes are available through Bluetooth.
Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

Touch Screen GP10/GP20

The SMARTDAC+TM GP10/GP20 is a portable paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices.
Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

Touch Screen GX10/GX20

The SMARTDAC+TM GX10/GX20 is a panel mount paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices.
Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

Top