I want to switch SMARTDAC+ GX/GP series' PID groups using contact input (DI), but when I try to specify the PID numbers in the action settings, bits 0-3 don't appear.

You have to set the PID selection method to External selection under Screen change > Settings > Control settings > Control basic setting > Control loops.

Related Products & Solutions

Touch Screen GP10/GP20

The SMARTDAC+TM GP10/GP20 is a portable paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices.
Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

Touch Screen GX10/GX20

The SMARTDAC+TM GX10/GX20 is a panel mount paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices.
Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

Top