I’d like to confirm the parameters that can be set for TC10 RS485 communication setting criteria (protocol, baud rate, parity, stop bit, data length). | Yokogawa Electric Corporation

Yokogawa | Co-innovating Tomorrow

I’d like to confirm the parameters that can be set for TC10 RS485 communication setting criteria (protocol, baud rate, parity, stop bit, data length).

The TC10 communication setting criteria are as follows.

Protocol: Modbus RTU (fixed)
Baud rate: (1200, 2400, 9600, 19200, 38400)
Parity: None (fixed)
Stop bit: 1 (fixed)
Data length: 8 bits (fixed)
Address: OFF (no communication), 1 to 254

Note: The TC10 does not support PC link or ladder communication protocols.

TC10

The TC10 is a compact single loop temperature controller with an easy-to-read 3-color LED display. The shallow depth of the controller helps save to space. The TC10 supports easy configuration with codes for quick start-up.