Global   
TC10
Control Devices

Temperature Controller TC10

The TC10 is a compact single loop temperature controller with an easy-to-read 3-color LED display. The shallow depth of the controller helps save to space. The TC10 supports easy configuration with codes for quick start-up.

Main Features

  • Compact size: 48 x 48 mm (1/16 DIN), depth of 48 mm + 14 mm (terminals)
  • 3 Dynamic Colors Led Display
  • Universal input: (TC, mV, V, mA, Pt100-Pt1000)
  • 4 Set Points and alarm functions
  • Serial communication : RS-485 Modbus
  • PID control, ON/OFF, Auto-tuning
  • IP65 front panel (when the optional panel gasket is mounted)(optional)

Details

  • UT130

    Compact 1/16 DIN sized easy-to-see Temperature Controller that comes with large (17.5 mm height) 3-digit display. Universal input, "SUPER" overshoot suppress function and dynamic auto tune are standard. Heating/cooling control and RS485 communication are optional features.

    See More

  • UT35A/UT32A

    The UT35A and UT32A temperature controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. A ladder sequence function is included as standard. The short depth of the controller helps save instrument panel space. The UT35A/UT32A also support open networks such as Ethernet communication.

    See More

  • UT32A-D

    The UT32A-D is a compact digital indicating controller with selectable 2-loop control. It also includes a ladder sequence function.

    See More

  • Mid-level UT55A/UT52A

    The UT55A and UT52A temperature controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. A ladder sequence function is included as standard. The short depth of the controller helps save instrument panel space. The UT55A/UT52A also support open networks such as Ethernet communication.

    See More

  • Advanced Application UT75A

    The UT75A temperature controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. A ladder sequence function is included as standard. The short depth of the controller helps save instrument panel space. The UT75A also support open networks such as Ethernet communication.

    See More

Resources

Application Note
Temperature Control for Seal-heating Parts in Wrapping Machinery
Thumbnail
Overview:

The TC series of temperature controllers is perfect for controlling the heating temperature of sealing parts and the temperature of sealing rolls (pre-heating) in a variety of different wrapping machinery.

Industries:
I want to use it as a display. Can I hide the SP display?
(ns-faq-ut-2202-spec)
Yes. Set DISP to nonE.
With thermocouple K input, can I display digits after the decimal point for the temperature?
(ns-faq-ut-2206-setting)
Yes, by changing the DP setting from 0 to 1. When you do this, the upper limit range of 1000°C becomes 999.9°C.
How many analog outputs are there?
(ns-faq-ut-2204-spec)
There is 1 analog output.
Can I use the DI function to switch between auto/manual and between run stop/start?
(ns-faq-ut-2205-spec)
Yes.
Is there a controller to which I can connect a 2-wire Pt1000 Ω sensor?
(ns-faq-ut-2217-select)
Yes, the TC10.
When installing the TC10, what is the depth in millimeters from the surface of the panel?
(ns-faq-ut-2220-spec)
62 mm. Reffer to Specifications
Does the TC10 support a 2-wire Pt1000 Ω?
(ns-faq-ut-2221-spec)
Yes. Refer to Specifications
Can I initialize parameters on the TC10?
(ns-faq-ut-2225-setting)
Yes. On the PASS screen, set “-481.”
Can I turn off the "°C" display with input other than temperature on TC10?
(ns-faq-ut-2226-spec)
Yes, if the input type is voltage or current.
What settings should I use to output PV transmission from ananalog output terminal on TC10?
(ns-faq-ut-2227-setting)
Set detailed parameter out group o1.F (output 1 function) = r.inP.
When using an external power supply with 2-wire wiring of TC10, what is the input resistance when inputting 4-20 mA?
(ns-faq-ut-2228-spec)
Approximately 24 Ω.
On the TC10, what does it mean if AL and 1 are lit?
(ns-faq-ut-2235-spec)
AL on the front of the TC10 is the alarm lamp. 1 to 4 indicate the status of outputs 1 to 4.
I want to use the detailed parameter setting method of TC10, but what number is the password?
(ns-faq-ut-2234-setting)
The default password is 30.
On the TC10, I want the difference lower limit alarm to be ON 5°C below the setpoint value. Do I need a minus sign ( - ) on the alarm setting value?
(ns-faq-ut-2236-setting)
Yes. Set an alarm value of -5°C.
I'm sending the temperature via PV transmission on TC10. Can I output in the 100% direction (20 mA or more) upon burnout?
(ns-faq-ut-2237-setting)
On burnout, it will be 0 mA. There is no parameter for specifying the output direction.
I selected SP value transmission on TC10, but no SP value is displayed.
(ns-faq-ut-2238-setting)
The SP value is not displayed if you don’t specify a control operation. Assign OP4 to the control output operation.
What is the I/O response time of the TC10?
(ns-faq-ut-2251-spec)
Approximately 2 seconds or less. (63% response when the input changes from 10% → 90%)
There's no SG terminal for wiring RS485 communication on the TC1. If the other instruments have an SG terminal, how should I wire it?
(ns-faq-ut-2252-connect)
Only wire the other instrument’s SG terminal.
What is the TC10’s warranty period?
(ns-faq-ut-2253-other)
18 months (a year and a half) after shipment from the factory.
Are the TC10’s wiring terminals screw terminals?
(ns-faq-ut-2254-spec)
No, they’re clamp terminals.
What is the measured current of the TC10's RTD input?
(ns-faq-ut-2255-spec)
Pt100: 150 μA Pt1000: 15.5 μA
I'm looking for a replacement for the UD310. Can it output the SP setting value?
(ns-faq-ut-2203-spec)
Yes.
Does the TC10 come with a terminal cover?
(ns-faq-ut-20032-other)
No. TC10 does not come with a terminal cover.
What is the /GK suffix code for the TC10?
(ns-faq-ut-20061-spec)
The /GK suffix code means it comes with a panel gasket. With the /GK suffix, the TC10 supports the IP65.
I’d like to confirm the parameters that can be set for TC10 RS485 communication setting criteria (protocol, baud rate, parity, stop bit, data length).
(ns-faq-ut-20080-setting)
The TC10 communication setting criteria are as follows. Protocol: Modbus RTU (fixed) Baud rate: (1200, 2400, 9600, 19200, 38400) Parity: None (fixed) Stop bit: 1 (fixed) Data length: 8 bits (fixed) Address: OFF (no communication), 1 to 254 ...
What is the input resolution specification the TC10?
(ns-faq-ut-20081-spec)
The input resolution specification the TC10 is 30000.
Can you issue a TC10 calibration certificate?
(ns-faq-ut-20082-other)
Yes, if ordered at the time of purchase.

Downloads

Brochures
Instruction Manuals
General Specifications
Technical Information
Certificates
Drawings

Looking for more information on our people, technology and solutions?

Contact Us
Top