High Pressure/ High Temperature Conductivity Sensor SC42/SX42

High Pressure – High Temperature Contacting sensor primarily designed for Boiler Blowdown and Condensate Leak detection applications. These conductivity cells have extremely high temperature and pressure ratings: the threaded types can handle 16 bar at 200°C and the flanged types can handle 40 bar at 250°C.

Series

Details

   SC42 Small-Bore 2 SX42 Large Bore SX42 Large Bore 2
Model Code SC42 Small Bore SX42 Large Bore
Cell Constants 0.1/cm; 1.0/cm 0.1/cm; 1.0/cm 0.1/cm; 1.0/cm
Ranges 0.4-2,000 µS/cm; 4.0-5,000 µ/cm 0.02-2,000 µS/cm; 0.2-20,000 µS/cm 0.02-2,000 µS/cm; 0.2-20,000 µS/cm
Temperature Element Pt1000 Pt1000 Pt1000
Pressure Rating 7 bar/100 PSIG 16 bar/ 228 PSIG 40 bar/ 570 PSIG
Maximum Temperature 100°C/212°F up to 200°C up to 250°C
Installation Connections 3/4" NPT Fitting; 1", 1.5" or 2" Tri-Clamp 1" NPT 2" 600lb ANSI Flange
Integral Cable NO NO NO
Materials Of Construction 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Design Sytle 2-Electrode 2-Electrode 2-Electrode

Resources

Overview:

 


 

 

1. Sensor material: Sensor materials are very significant; the insulator between the two electrodes must not deteriorate over time. For example, when measuring in Ultra-Pure Water (UPW) is being made at 18MΩ: any of the insulation degradati...
The measurement range of an analyzer is determined by the hardware components and limitations such as the range of insulation, measurement voltage and frequency it operates at. In each range, different combinations of voltage and frequency are requir...

Downloads

Drawings

Videos

Overview:

Check out what is in the box when you receive Yokogawa epoxy type conductivity sensor SV42-EV15.

Looking for more information on our people, technology and solutions?

Contact Us

Top