CellPathfinder Software

CellPathfinder is designed for our HCA systems, CQ1 and the CellVoyager series. From beginners to experts, the analysis software lets you quantify subtle physiological changes and even label-free samples with various graph options.

Note:
Software performance is guaranteed only if CellPathfinder Software is installed on a PC designated by Yokogawa. CellPathfinder Software can be used by customer’s own Workstation. Although it can not be guaranteed that it operates normally, so please fully check the operation with a free trial version etc. Specification of workstation recommended by Yokogawa is below:
 

Workstation

The specification of the workstation for CellPathfinder that Yokogawa offers are as follows.

^*1 PassMark score is one of the benchmarks used to evaluate hardware performance.
^*2 When analyzing tiled images using the Machine Learning option, 128 GB of memory is recommended.
^*3 This specification is not recommended for automatic analysis.
^*4 This is the recommended version as of May 2024.

Software

Please download a file [CellPathfinder_Installer_R3.07.02 (757 MB)]. To use CellPathfinder, the activation code is required.
Right-click the downloaded ZIP file, select "Properties", check "Unblock" in the figure below, click the "OK" button, and then unzip the ZIP file.

Please install by referring to "Install_Manual [IM_80K01B02-01E-011].pdf" in the unzipped folder.

In case of installing Deep Learning Option, download [CellPathfinder_Installer_R.3.07.02_DeepLearning (3.69 GB)] and unzip the ZIP file by the same procedure as described above. Then install by referring to "Install Manual [IM_80K01B03-01E_007.pdf]" in the unzipped folder.

Fill in the request sheet and send to us by e-mail.

Tutorial

We prepared tutorials that explains how to use CellPathfinder in an easy-to-understand manner.