Even in the YS1350 and YS1360 Cascade mode (C mode), the output value of the MV does not follow the value of the cascade input (X2) . How do I output the value of the cascade input on the MV?

首頁
資料庫
參考
常見問題
Even in the YS1350 and YS1360 Cascade mode (C mode), the output value of the MV does not follow the value of the cascade input (X2) . How do I output the value of the cascade input on the MV?

To output the cascade input (X2) during cascade operation, set the setting value of CONFIG2 > CMOD1 to CAS.

Note: The default value for CMOD1 is "-".

YS1350/YS1360

YS1350是一款手動設定裝定，可以手動輸出設定信號至控制器等設備。YS1360是一款手動設定裝定，可以手動輸出操作信號至操作終端。