Even in the YS1350 and YS1360 Cascade mode (C mode), the output value of the MV does not follow the value of the cascade input (X2) . How do I output the value of the cascade input on the MV?

Home
Library
Resources
FAQs
Even in the YS1350 and YS1360 Cascade mode (C mode), the output value of the MV does not follow the value of the cascade input (X2) . How do I output the value of the cascade input on the MV?

To output the cascade input (X2) during cascade operation, set the setting value of CONFIG2 > CMOD1 to CAS.

Note: The default value for CMOD1 is "-".